Re: pci vs pci-x

Great. thx very much again.


"daytripper" <day_trippr@xxxxxxxxxxxxxxx> wrote in message
news:4o8ld2pkisoa72h5b1qfqe4s38gjm59cm4@xxxxxxxxxx
On Thu, 10 Aug 2006 03:04:57 GMT, "gg" <GGsomeone@xxxxxxxxxxxxxxxxxxxx>
wrote:
"daytripper" <day_trippr@xxxxxxxxxxxxxxx> wrote in message
news:rh7ld2hjg1mbo99vriha4679jrh5k9cr4s@xxxxxxxxxx
On Thu, 10 Aug 2006 02:40:38 GMT, "gg" <GGsomeone@xxxxxxxxxxxxxxxxxxxx>
wrote:

"daytripper" <day_trippr@xxxxxxxxxxxxxxx> wrote in message
news:ui1ld254apjvmeinv6m4ia1336d7pp8s7j@xxxxxxxxxx
On Thu, 10 Aug 2006 00:51:02 GMT, "gg"
<GGsomeone@xxxxxxxxxxxxxxxxxxxx>
wrote:

hope this is the right ng.
when the mainboard doc. mentions pci bus ( got the system around aug
2004), what is it is PCI 66 just the speed but same pin out as pci
133?
what about pci 64

I am asking because I need a scsi ultra 160 lvd/se compatible
controller
for a tape drive. I used Google on pci vs. pci-x but I am still
confused

Your mainboard slots could be PCI 32 bit or 64 bit @ 33mhz or 66mhz,
or
they could be PCI-X @100mhz or even 133mhz, or they could be a mix.
Without knowing the system make/model there's little chance we're
going to guess
correctly...

/daytripper


thx.
unfortunately it is not asus board and no corresponding active newsgroup
for this DFI ps83-bl board

Your DFI board has five PCI slots, 32 bits each, 33 mhz. PCI v2.2
compatible.

An Adaptec 19160 or equivalent would do the trick...

/daytripper

great! thank you for your patience and helpful info. I found Adaptec
19610LP for in the low C$200 plus shipping
I had sent another post before I saw you post - please ignore that.

If you would like a copy of the manual for your motherboard, it's at:
http://www.dfi.com.tw/Upload/Manual/ps828385%20bc%20bl%207030030822.pdf

/daytripper



.

Relevant Pages

  • SATA on kernel 2.4.27: lost interrupt
    ... Occasionaly I get lost interrupt messages during system initialization, ... as per Adaptec personal support ... Adaptec AAR-1210SA: IDE controller at PCI slot 01:0a.0 ... Adaptec AAR-1210SA: not 100% native mode: will probe irqs later ...
    (Debian-User)
  • Adaptec 29160 SCSI card and VMS
    ... Some time ago I posted a question about an Adaptec 29160 Ultra160 ... PCI SCSI adapter working with VMS. ... VMS 7.3 works, if the interface card is ...
    (comp.os.vms)
  • Re: Intel Pro/1000 82540 Ethernet, was RE: SuperMicro X5DEI-GG
    ... it's PCI slot, in addition to the one on the motherboard. ... the Adaptec in the PCI slot conflicted with the onboard network ... but showed flaky network performance. ...
    (freebsd-net)
  • Re: pci vs pci-x
    ... mentions pci bus (got the system around aug ... I used Google on pci vs. pci-x but I am still ... this DFI ps83-bl board ... An Adaptec 19160 or equivalent would do the trick... ...
    (alt.comp.periphs.mainboard.asus)
  • Re: pci vs pci-x
    ... mentions pci bus (got the system around aug ... I used Google on pci vs. pci-x but I am still ... for this DFI ps83-bl board ... An Adaptec 19160 or equivalent would do the trick... ...
    (alt.comp.periphs.mainboard.asus)