Re: Update ESCD successfully

I have the same message "update ESCD successfully" constantly before
the chip went south and displays "Can't write to ESCD".The funny thing
is i did not change any hardware.

Although the chip reports"Can't write to ESCD", i still can boot into
windwos( but missing the old sound card!)

Maybe your case is different, but in the case i just pulled a BIOS chip
from a junk board (same size, same voltage) and flash it with
uniflash.And it works great now.


kimiraikkonen wrote:
Hi there,
I have Asus P4B533 with updated BIOS to 1015.

Sometimes i see that message at boot sequence and i use Windows 2000 +
SP4

"Update ESCD successfully".

Then my Microsoft USB optical mouse cannot be recognized under just for
once, and i re-connected the mouse while i'm at Windows Desktop, it is
recognized now and after that event, i don't get that message. "

I have 2 questions under lights of that experience:


1-Does "update escd successfully" message appear when there is a REALLY
hardware configuration change? Or can it apper although there is no
hardware configuration change such as USB connections?

2-I hardly remember i haven't changed my USB port of my mouse but after
2 days, i got "update ESCD successfully" and the mouse wasn't
recognized by Windows until i re-connect it at desktop screen.

Please clarify.

Thanks.

Onur Guzel

.

Relevant Pages

  • Update ESCD successfully
    ... Sometimes i see that message at boot sequence and i use Windows 2000 + ... 1-Does "update escd successfully" message appear when there is a REALLY ... hardware configuration change such as USB connections? ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Rotten USB to RS232 adaptors.
    ... those build with the PL2303 chip) have no unique identifiers. ... in that case Windows has the same problem as Linux, ... The most annoying part is that nowhere on any USB to RS-232 cable that I've ...
    (sci.electronics.design)