Re: OT: UART16550C and speeds over 115200

From: "Daniel Mandic" <daniel_mandic@xxxxxxx>

| Hi NG
|
| Is there a way to drive the onboard COM1 and 2, or one of them, over
| the max bandwith of 128000 baud? Let's say, 230400 baud.
|
| I remember drivers on other UARTs (38k4 max.), raising the max.
| bandwith. Mostly CPU dependant...
|
| Best Regards,
|
| Daniel Mandic
|

No. That's why theu came up with USB v1.x and then USB v2.0.

--
Dave
http://www.claymania.com/removal-trojan-adware.html
http://www.ik-cs.com/got-a-virus.htm


.

Relevant Pages

  • OT: UART16550C and speeds over 115200
    ... Is there a way to drive the onboard COM1 and 2, or one of them, over ... the max bandwith of 128000 baud? ... Let's say, 230400 baud. ... Mostly CPU dependant... ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Looking for 9 bit RS485 solutions
    ... giving up on USB to 9 bit 485 adapters. ... Must work at the "odd" baud rate of 187500 baud. ... I used to work for a manufacturer of high-speed serial boards, ...
    (comp.arch.embedded)
  • Re: Low power USB Microcontroller
    ... USB slow or fast, RS232-300-19200 baud min, prefer upto 115200. ... switch to low power mode before we run out of power. ... me that after switching clocks if the baud rate divisor is adjusted it ...
    (comp.arch.embedded)
  • Re: Low power USB Microcontroller
    ... USB slow or fast, RS232-300-19200 baud min, prefer upto 115200. ... switch to low power mode before we run out of power. ... me that after switching clocks if the baud rate divisor is adjusted it ...
    (comp.arch.embedded)
  • Re: Dejan Crnilas TComPort efficiency - SOLUTION
    ... John Herbster wrote: ... > Here are the Win2K/SP2 results at different baud ... > and character burst rates for both the case using ... USB drivers? ...
    (borland.public.delphi.thirdpartytools.general)