Re: BSoD on Windows Install - ASUS P5WD2
- From: "Mercury" <me@xxxxxxxx>
- Date: Tue, 27 Jun 2006 21:28:52 +1200
Check the floppy cable is in around the right way - pin 1 to pin1 - always
green LED = upside down cable - I did it yesterday.
"lilrubberduky" <lilrubberduky@xxxxxxxxx> wrote in message
news:1151355353.630503.20860@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
i got an internal floppy drive to try that and see if it would respond
better to the S option in F6 driver menu, but windows does not ever try
to use the floppy drive. the light is always green (even without a
disk) but it never even sounds like it's in use. I'll try another
floppy drive.
I was hoping that this would load drivers when I hit S instead of
loading them when I hit enter, but that's not working at all.
It is recognizing the floppy drive though. If I disable the BIOS Legacy
Floppy option (it's set to 3.5" 1.44MB option) then the windows setup
doesn't think there is a floppy drive. (So I know that option has an
effect)
The setup atleast loaded the .sys files I was feeding it through the
external USB FDU (after skipping the S option, I hit enter and it reads
the files and puts them into memory).
So I'm at a loss again,
Thoughts?
Thanks,
-Dan
.
- References:
- BSoD on Windows Install - ASUS P5WD2
- From: lilrubberduky
- Re: BSoD on Windows Install - ASUS P5WD2
- From: lilrubberduky
- Re: BSoD on Windows Install - ASUS P5WD2
- From: lilrubberduky
- Re: BSoD on Windows Install - ASUS P5WD2
- From: lilrubberduky
- Re: BSoD on Windows Install - ASUS P5WD2
- From: lilrubberduky
- BSoD on Windows Install - ASUS P5WD2
- Prev by Date: Re: P4C800 Deluxe "Overclocking failed", random shutdowns during startup
- Next by Date: Re: Dead A7V333 (maybe) - how do I tell ?
- Previous by thread: Re: BSoD on Windows Install - ASUS P5WD2
- Next by thread: Re: BSoD on Windows Install - ASUS P5WD2
- Index(es):
Relevant Pages
|