Re: Monitor problem / power off


If you go to "Device Manager", and examine the "Computer" entry,
does it show "Standard PC" or does it say "ACPI ..." ? It almost
sounds like the wrong HAL (hardware abstraction layer) is being
used. I think with "Standard PC", you have to use the power
switch to turn it off.

I have "PC Multiprocessors ACPI", and I don't know if it's possible to add something else.

Francois

--
Francois A.
_________

Excellent newsreader : http://mesnews.no-ip.com


.

Relevant Pages

  • Re: Remote switches
    ... pushbutton connected to the two power control pins on the mainboard. ... On some destops the front switch is actually switching line voltage so ... not support the standard ATX power control. ...
    (comp.sys.laptops)
  • Re: "Pendolino First Class Only"
    ... >> I've had to switch from first class to standard, ... Stay in first class away from the oiks, ... Will power dear boy - will power. ... I'll switch back in a couple of months when I go back to ...
    (uk.media.tv.misc)
  • Re: calculator
    ... Switch to the Scientific display if you are on Standard ... ) (X raised to the POWER Y) ...
    (microsoft.public.windowsxp.general)
  • Re: Bridgeport boss 4 Spindle not powering up (continued)
    ... you need to reset a safety interlock on the motor switch pod ... I can work my way through the average power ... activate the spindle all he would get would be a buzzing sound. ... each for a different axis stepper motor drive). ...
    (rec.crafts.metalworking)
  • Re: PC doesnt start
    ... With the switch pressed the voltage are within the specs but, ... I measured the voltage at the Power switch plug, when connected to the MoBo, ... Why then would a power switch or connections be ...
    (microsoft.public.windowsxp.hardware)