Re: ASUS P4V800D-X SATA Install problem
- From: "Thomas Wendell" <tumppiw_nospam@xxxxxxxxxxx>
- Date: Sun, 23 Apr 2006 19:49:31 +0300
That most likely is NOT a SP1 Xp disk.. read on google how to make a
slipstreamed SP2-disk...
--
Tumppi
=================================
Most learned on these newsgroups
Helsinki, FINLAND
(translations from/to FI not always accurate
=================================
"Steve" <steve@xxxxxxxxxxxxxxxxxx> kirjoitti
viestissä:T-udnbg3g-rrMtfZRVnyhA@xxxxxxxxx
I've just put together a config based on the above motherboard. I've
installed a 2.6GHz P4 processor and 256MB of DDR and the POST works fine.
I have installed a MAXTOR 250Gig SATA-II drived jumpered for 150Gb/s
operation.
In the BIOS I have SATA - IDE enabled (ie no RAID). The Bios correctly
reports a 250G Maxtor during POST as drive Master 3.
When I then try to install XP from my XPSP1 CD, the drive is reported as
being 131Gb. How do UI get XP to recognise the correct size of the drive?
TIA
STeve
.
- Follow-Ups:
- Re: ASUS P4V800D-X SATA Install problem
- From: Steve
- Re: ASUS P4V800D-X SATA Install problem
- References:
- ASUS P4V800D-X SATA Install problem
- From: Steve
- ASUS P4V800D-X SATA Install problem
- Prev by Date: Re: Intel or AMD?
- Next by Date: Re: CUSL2-C botting problem, cannot recognize hard drive
- Previous by thread: Re: ASUS P4V800D-X SATA Install problem
- Next by thread: Re: ASUS P4V800D-X SATA Install problem
- Index(es):
Relevant Pages
|
