Strange SATA info on boot
My new PC is working fine. Has an A8N SLI-SE board and two identical
SATA drives, one connected as master 1 the other as master 2.
All is working well, it's just that on booting, the disc on master 1
is using LBA and that on master 2 CHS.
Can anybody explain the difference and tell me if it's significant?
TIA.
--
Cheers,
Guy
** Stress - the condition brought about by having to
** resist the temptation to beat the living daylights
** out of someone who richly deserves it.
.
Relevant Pages
- Re: Problems with 2nd Internal Hard DRive Installation
... which drive will be the Master and which will be the Slave. ... for SATA drives. ... what key do I hit to get to my bios on my giga-byte mobo? ...
(microsoft.public.windowsxp.basics) - Re: Problems with 2nd Internal Hard DRive Installation
... which drive will be the Master and which will be the Slave. ... for SATA drives. ... what key do I hit to get to my bios on my giga-byte mobo? ...
(microsoft.public.windowsxp.basics) - Re: Problems with 2nd Internal Hard DRive Installation
... When you bottom post, the entire thread is copied to my reply. ... I was told that to set a HD to Master or Slave, there have to be jumpers on the HD and SATA drives don't have jumpers. ...
(microsoft.public.windowsxp.basics) - Re: slightly OT: Install 2nd SATA hd
... Rob Giordano (Crash) wrote: ... | SATA drives connect to the motherboard/controller with individual ... All drives are handled as master, ...
(microsoft.public.windowsxp.basics) - Re: slightly OT: Install 2nd SATA hd
... | SATA drives connect to the motherboard/controller with individual ... All drives are handled as master, ... | jumpers on SATA drives. ...
(microsoft.public.windowsxp.basics) |
|
