Re: A7N8X Lockups



When I had problems with this board, delux rev2, same spec as you, it
transpired it was a memory problem.
I was using dual 'value' ram, got new dual 512 crucial ram and it was fine.
Bios updated and set to defaults.
However bd failed some 6 mnths later - bummer!


"old_Boat" <OldBoat@xxxxxxxxxxx> wrote in message
news:oqbMf.130553$Q11.98213@xxxxxxxxxxxxxxxxxxxxxxxxx
I have an A7n8X with a 2500 Barton processor. What would the proper
settings
for this chip be as for FSB, multiplier, Voltages etc. This is the
axda2500kv4d. I am experiencing frequent lockups with this combination
unless I run it so that the board thinks it is an xp 1900. memory is 2
sticks of 512 mb pc3200 400 mhz.

Thanks,

LJ




.



Relevant Pages

  • Re: S-100 resurrection in Australia
    ... then the fact that the parity error light comes on does NOT ... If "the" problem is a RAM memory problem: ... specifics of such numbering schemes. ...
    (comp.os.cpm)
  • Re: SCO crash
    ... >> a memory problem? ... >netserver) and there was no error. ... >RAM. ... be sure is to pull it and put it in a hardware tester. ...
    (comp.unix.sco.misc)
  • Re: Vista Crashing Constantly!! Please Help!
    ... memory_management Blue Screens. ... 2GB RAM and waiting to see if it still crashes. ... There are physical memory dumps on all of these errors. ... You'd be surprised how many found a memory problem, and not reported back, after running Memtest. ...
    (microsoft.public.windows.vista.general)
  • Possible? Large memory problems on commodity computing
    ... Is it possible to run a large memory problem on a Beowulf cluster, ... will a severe bottleneck appear at the RAM available for each node? ... is a Beowulf cluster set up so that it is only the *total* RAM that is ... then only one licence would be needed. ...
    (comp.os.linux.misc)
  • Re: DDR MHZ
    ... explains the ratching down of your RAM to PC2700, it keeps the CPU and RAM ... components remain "in spec", i.e., NOT overclocked. ... ANYTHING is suspect at this point. ...
    (microsoft.public.windowsxp.help_and_support)