A8N32-SLI Deluxe MB Temp Sensor

Does anyone have the exact location of the motherboard temperature
sensor on the A8N32-SLI Deluxe. I want to add a fan with a shroud to
shunt some extra outside air to that area.

I was thinking that it might be incorporated in the lower Nvidia chip.

Thanks

Norm
.

Relevant Pages

  • Re: Help needed. Fitting fan shroud to new case
    ... Thoroughly clean the fan and the fan housing, ... painting will make the fan shroud look very nice. ... Install the alternator fan assembly into the fan housing. ... through the firewall tin. ...
    (rec.autos.makers.vw.aircooled)
  • Re: 67 Mustang: Fan rub on shroud
    ... Bob ... > short shaft. ... When a shroud was added, ... >>almost seems that the fan is too close to the radiator. ...
    (rec.autos.makers.ford.mustang)
  • Re: CPU Replacement
    ... I have an asus a7n8x (not the deluxe version). ... What is the fastest replacement CPU I can put in that mobo? ... Zalman fan. ... and fsb and creep up on the final ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Fan Clutch
    ... Then you can just spin the fan off... ... Pull it out with the shroud... ... Then take off the clutch from the ... *Men are from Earth, women are from Earth. ...
    (alt.autos.bmw)
  • Re: 67 Mustang: Fan rub on shroud
    ... Spike, ... Note the bottom on this shroud is cut. ... The fan spacing is about 5/8" from fan tip to top tank, ... The an shaft does nto look bent, and the radiator seems to sit ...
    (rec.autos.makers.ford.mustang)