Re: Need P2B-S mod help

Jeez, this is going to be my FIFTH time attempting to get this posted.
Fisrt four three had a screwy keyboard problem, then I made the
mistake of allowing the site to time me out.

I confused the VRM and clockgen. I've got an HIP6004BCB. Core voltage
adjusts to 1.3, correct? What's a good starting voltage for a 1.3
celery?

Any ideas on doing the agtl/agtl+ compromise like you did with the
6019 on your dual?

The slot-t board has fsb adjustment. Does it take over the mobo
control? I'd like to get the 112 the mobo allows if I cannot modify
the board for the faster clock rates.

All the celery tualatin images I see online show the chip with no heat
speader. Did they have a production change at some point?

I need to know the thread pitch and size for the cpu retention
mechnism studs in the asus boards. I did not get one originally, but
need to add it.

I ordered the AMP universal SEC/SECC/SECC2 retainers. They do not fit
the slot-t card! What gives there? The card looks like it fit's
intel's SECC only mechanism:

http://support.intel.com/support/processors/sb/CS-017374.htm

but these are supposed to fit the SECC, too. Here they are:

http://www.pccables.com/07054.htm

Am I supposed to remove the top-half of the connector and let the
pressure from the "sprung" piece in the side hold it in?
Upradeware's card won't slide all the way to the board with these,
either, unless I modify (the base fits snugly around the end of the
board connector).

What craziness. Almost there... gotta go order that heatsink now.

.

Relevant Pages

  • Re: Need P2B-S mod help
    ... I confused the VRM and clockgen. ... The card looks like it fit's ... but these are supposed to fit the SECC, ... Am I supposed to remove the top-half of the connector and let the ...
    (alt.comp.periphs.mainboard.asus)
  • AGP graphics cards.
    ... 128MB has 2 slots in it's connector. ... the S3 would not fit a machine which was designed to have 2-slotted ... card, but the arjre 64MB card would fit in the ... I gather there are 2 voltages, and I further gather that the arj ones are ...
    (uk.rec.sheds)
  • Re: AGP graphics cards.
    ... > 128MB has 2 slots in it's connector. ... the S3 would not fit a machine which was designed to have 2-slotted ... > card, but the arjre 64MB card would fit in the ... Best make yourself a new plastic doofer. ...
    (uk.rec.sheds)
  • Re: PCI Versions
    ... > The card did fit into the PCI slot after all, the problem was that the side ... > The PCI connector part of the card was divided into only 2 parts, ...
    (uk.comp.homebuilt)
  • Re: changing the fan cooler on my video card
    ... Now that the card is bare of a cooler. ... what the connector says are pointed inwards on the inside pins and the ... using a screw driver to screw in the motherboard screws that has been ... This Zalman comes with extra RAM, ...
    (microsoft.public.windowsxp.hardware)