Re: P4P800 SE -- drivers for networking?
- From: "jb" <st1@xxxxxxxx>
- Date: Mon, 30 Jan 2006 13:55:33 -0600
Sure they make them.. try provantage.com I had to buy a new one just two
weeks ago.. .
the really fun part is trying to find a 478 P4 to fit in one.. ;)
GO to the asus site search for the P4p.... and download the latest Marvel
lan drivers. 7.29's I think..
unzip and run... worked for me.
jb..
"Chris" <nojunk@xxxxxxxxxx> wrote in message
news:nojunk-3101060715510001@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Jim,
>
> There is no other ethernet card -- but if the Marvell chip is dead I'll
> hit the dealer up for an ethernet card because I had bought the last
> socket 478 board I could find in the city and they don't make them
> anymore.
>
> Chris
>
> In article <to6dnWrYwaSxJ0DenZ2dnUVZ_sSdnZ2d@xxxxxxxxxxx>, "BigJim"
> <woody10277@xxxxxxxxxxx> wrote:
>
>> after doing some more thinking you might have a conflict with the
>> two Ethernet connections, btw it does have a Marvell lan.
>> try taking out your other card and see if it will install then.
>>
>> "Chris" <nojunk@xxxxxxxxxx> wrote in message
>> news:nojunk-3001061153070001@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>> > Hi,
>> >
>> > I have just replaced the motherboard on my machine with a P4P800 SE.
>> > The
>> > existing Soltek motherboard crapped out after just over 2 years from
>> > new
>> > (conveniently out of warranty). Anyway, everything is running fine
>> > except
>> > for the networking.
>> >
>> > What I have is a Apple Mac that I use for all internet usage with an
>> > ethernet cable connected to the PC so I can transfer files. The PC
>> > worked
>> > via. a LAN connection in Windows 2000. As I understand, this is
>> > automatically configured the first time Windows boots up. The
>> > "detecting
>> > new hardware" dialog came up and told me that an ethernet controller
>> > was
>> > detected. So far so good. I then inserted the CD that came with the
>> > motherboard so that I could load the appropriate driver and Windows
>> > scanned through it to find the driver. Unfortunately the end result
>> > was
>> > that Windows said that it could not find any suitable driver ("what the
>> > f**k?"). I then went to the ASUS web site and downloaded what appeared
>> > to
>> > be the appropriate driver but still no go.
>> >
>> > Now this thing is supposed to have a Marvell 88E8001 Gigabit ethernet
>> > controller according to the manual, and indeed there is the ethernet
>> > port
>> > on the motherboard. The manual mentions that normally there is a hub
>> > connected to the port but in my case the cable is connected directly to
>> > the Macintosh computer and that worked fine before. I do not want to
>> > have
>> > to shell out and get a separate ethernet card! I'm sure I don't need
>> > to
>> > do that!
>> >
>> > So can anybody point me to the correct network drivers for this
>> > motherboard? Or tell me how you did it?
>> >
>> > Any help greatly appreciated.
>> >
>> > Regards,
>> >
>> > Chris
.
- References:
- P4P800 SE -- drivers for networking?
- From: Chris
- Re: P4P800 SE -- drivers for networking?
- From: BigJim
- Re: P4P800 SE -- drivers for networking?
- From: Chris
- P4P800 SE -- drivers for networking?
- Prev by Date: Re: !Re: a8n boot failure - ram issue?
- Next by Date: Re: P4PE and Celeron D
- Previous by thread: Re: P4P800 SE -- drivers for networking?
- Next by thread: Re: P4P800 SE -- drivers for networking?
- Index(es):
Relevant Pages
|
