Re: P5WD2-E and Marvell PATA
- From: "Ned Buckmaster" <Ned@xxxxxxxxxxxxxx>
- Date: Sun, 29 Jan 2006 05:53:32 -0600
Dude, you ought to know the facts before you try to play the smarta$$....
The board has three Marvell devices on it - two 88E8053 ethernet controllers
and a 88SE6141 PATA/SATA controller.
"Anthony Horan" <anthonyhoran@xxxxxxxxxxx> wrote in message
news:139fdgf3f8zdh$.fewmsc1xd5a7.dlg@xxxxxxxxxxxxx
> On Sat, 28 Jan 2006 20:19:36 -0600, Ned Buckmaster wrote:
>
>> I spent hours trying to get an E-IDE hard drive working on the Marvell
>> IDE
>> connector.
>
> Perhaps not surprising you had difficulties, since the Marvell chip on
> that
> board controls Ethernet and has nothing at all to do with hard disks...
.
- References:
- P5WD2-E and Marvell PATA
- From: Ned Buckmaster
- Re: P5WD2-E and Marvell PATA
- From: Anthony Horan
- P5WD2-E and Marvell PATA
- Prev by Date: Re: Boot trouble help
- Next by Date: Re: P5VD1-X - completely dead - any ideas?
- Previous by thread: Re: P5WD2-E and Marvell PATA
- Next by thread: SATA-II hard drive
- Index(es):
Relevant Pages
|
