Re: K8V-MX SATA and XP instal problem
- From: nospam@xxxxxxxxxx (Paul)
- Date: Sun, 15 Jan 2006 15:14:48 GMT
In article <oviks111p71e2rn02g3fqs2abgppqicp3j@xxxxxxx>, SDR <a@xxxxxxx> wrote:
> On Sun, 15 Jan 2006 20:41:12 +0800, "MYOB" <tward2002@xxxxxxxxxxxxxxx>
> wrote:
>
> >I have just installed XP on a SATA drive on a K8V-MX.
> >Make sure that the Onboard Devices Configuration, Onboard SATA-IDE is set to
> >SATA and not Raid in the BIOS
> >I then booted from the XP CD and didnot need to press F6 or load drivers
> >from floppies.
> >
> I cannot see the "Onboard SATA-IDE is set to SATA and not Raid in the
> BIOS" option in BIOS.
>
> Can this be due to BIOS version?
In the manual section "Onboard Devices Configuration", there
is:
Onboard SATA [Enabled] options=enable or disable
Onboard SATA BootROM [Enabled] options=enable or disable
Onboard SATA-IDE [RAID] options=RAID or SATA
Maybe if SATA is disabled, the other two disappear ?
Try MYOB's suggestion first, and see if Windows sees the drive
in SATA mode well enough to do the install without F6.
If it still doesn't work, you can always try RAID mode and
F6 install a RAID driver to get some kind of JBOD working.
Paul
.
- References:
- K8V-MX SATA and XP instal problem
- From: SDR
- Re: K8V-MX SATA and XP instal problem
- From: Paul
- Re: K8V-MX SATA and XP instal problem
- From: MYOB
- Re: K8V-MX SATA and XP instal problem
- From: SDR
- K8V-MX SATA and XP instal problem
- Prev by Date: Re: P5LD2 Deluxe On-board audio problem
- Next by Date: Re: A7N8X-E Deluxe Clock Timing Issue
- Previous by thread: Re: K8V-MX SATA and XP instal problem
- Next by thread: SATA Drive won't boot, P4P800-E
- Index(es):
Relevant Pages
|
