Re: 2 SATA on a7n8x deluxe




hooray, the 1008-D bios fixed my problem.

For those who bothered to read all of that, i apologise for wasting 2
minutes of your time.

Bushy


"bushy2" <nbushnel@xxxxxxxxxxxxxx> wrote in message
news:fKtuf.167487$V7.88995@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> This one is driving me nucking futs.
>
> Yesterday i had my A7N8x deluxe rev 2 booting happily into winXP from a
> single maxtor 120gig SATA hdd. Then i bought a second SATA hdd, a 200gig
> Maxtor. I wasn't interested in RAID, but i figured SATA is the way of the
> future and i have a spare plug on the mainboard. So, the plan was to have
> two seperate hard drives, one of 120gigs and the other of 200gigs.
>
> A perfect opportunity to reformat and clean out the nerd-box, so i started
> from scratch. I installed the two hdds, the smaller of the two as the
> primary as this is where i wanted my windows install. I get through the
> winxp install without a hitch, installing the SCSI driver as commanded,
> and creating a single 120gig partition on my primary hdd. Once windows is
> loaded and i have video drivers and such on, i format the 20 gig drive as
> a single partition.
>
> it all goes awry when i restart the computer for the first time without
> the windows CD in the drive. The computer freezes after "verifying dmi
> something....." it says booting from CD, but there is no CD to boot from.
> and it never progresses. it just sits there. In much frustration i
> disconnected the 200gig drive and windows booted up flawlessly. So i
> reconnect the drive, and the same thing happens, the booting process
> freezes without even making it to the windows screen. if i start the
> computer with the windows CD in the drive, it loads fine, both hdds
> recognized perfectly.
>
> After a search of google groups, i haven't come across anyone with the
> same problem.
>
> In a nutshell, windows won't boot with both hdds connected. I am not
> interested in making an array, and yes, th ebios is set to boot from scsi.
> Any ideas? i'm going to try flashing the bios to 1008 tonight, and i'm
> hoping the updated Sil bios included in that will help, but i fear not.
> Any ideas, people of usenet?
>
> Bushy
>
> PS. damn i'm long winded.
>


.



Relevant Pages

  • RE: XP Pro boot hanging
    ... Digital HDD, for Sager laptop; using Acronis True Image 11, boot disk. ... Neither drive will boot into Windows. ... I checked drives ...
    (microsoft.public.windowsxp.general)
  • Re: Cloning to an eSATA drive
    ... windows after just turning it on (either in Windows Explorer or in Disk ... This behavior doesn't happen with the USB external enclosure drives; ... it makes it a bit inconvenient to make a clone using ... default settings re the SATA HDD seem to work just fine and the external ...
    (microsoft.public.windowsxp.general)
  • Re: Cloning to an eSATA drive
    ... windows after just turning it on (either in Windows Explorer or in Disk ... This behavior doesn't happen with the USB external enclosure drives; ... (even up to Intel's latest ICH10 SATA controller) ... default settings re the SATA HDD seem to work just fine and the external ...
    (microsoft.public.windowsxp.general)
  • RE: Restrict Access to drives
    ... The reason for this is very simple, Windows 2000 and Windows XP, ... By restricting access to the hdd to your users ... some other folders which may be necessary. ... Assunto: Restrict Access to drives ...
    (Focus-Microsoft)
  • Re: XP wont start, Cant use CD drive HeLp!! PLEASE!
    ... Instead of restarting it goes to the windows logo screen for about 4 ... Safe mode with networking ... I have tried putting that in BOTH of my CD rom drives and nothing ... a secondary HDD on a working system is a good one. ...
    (microsoft.public.windowsxp.help_and_support)