Re: Can my mobo support an internal card reader? Pics included.



Well, if I plug my usb webcam into the front panel usb, it works fine. It is
my thumbdrive that will not work when I plug it into the front panel usb.
When I plug my thumbdrive in, I get something saying the drive has not been
formatted, do you want to format it now. Of course, when I plug the
thumbdrive up to the rear usb port, it works fine.


"Paul" <noone@xxxxxxxx> wrote in message
news:dp809m$a8e$1@xxxxxxxxxxxxxxxxxx
> Just as long as the mobo has USB 2 headers
> and the reader is USB 2, it'll work.
>
> All you have to do is make sure you connect the wires
> to the right pins from the reader to the mobo header.
>
> Usually, internal card reader wires go from left to right.
>
> ie: They're coloured red,white,green,black black (only one of the black
> wires are used).
>
> The black wire always goes on the 4th/5th pin like this.
>
> o o o o o (sometimes the 5th pin isnt on the top row)
> R W G B
> o o o o o (the 5th pin is also never used, and left blank).
> R W G B
>
> Thats all you have to do. XP will read it as a removable disk. No drivers
> needed. Unless you want icons for the slots, in which case, you'll have to
> install the icons from the manufacturer's cd.
>
> "Gordon Scott" <gordsmail@xxxxxxxxxxxxx> wrote in message
> news:43A5EB75.E6E161D2@xxxxxxxxxx
>> Go Tyler wrote:
>>>
>>> I just bought this front panel usb thing for my comp:
>>>
>>> http://www.newegg.com/Product/Product.asp?Item=N82E16811998813
>>>
>>> It came with a cable that looks like this:
>>> http://tinypic.com/ilwolw.jpg
>>>
>>> It is hard to see in the pic, but it goes from the card reader to the
>>> motherboard somewhere. It has just 4 holes and it says VCC, D-, D+, and
>>> GND.
>>> The instructions say to connect it to "the pin header of the
>>> motherboard."
>>>
>>> Does the MOBO specifically have to support a card reader? I can't see
>>> where
>>> mine does, although I see all kinds of headers that seem to go with this
>>> cable. Here is my MOBO:
>>>
>>> http://www.baber.com/baber/411/asus_p4s533-mx.htm
>>
>> did you load the drivers for the card reader?
>> btw the newegg link doesnt seem to work.
>
>


.



Relevant Pages

  • Re: power over usb in the new garmins?
    ... We're talking about bog standard mini usb. ... My original question, was, is the power pin of that connector hooked up ... with the traditional plug. ...
    (sci.geo.satellite-nav)
  • Hotplug - how does it get the name?
    ... I'm trying to unravel the process by which my USB SB Card Reader gets ... The Reader is not a canon, though when I first installed Fedora FC3, I ... did plug in a Canon camera in the USB port. ...
    (Fedora)
  • Re: What is this 5 pin slot for on the back of card reader?
    ... then you have no way to get data from the card reader until you ... "externalize" the USB port. ... I have no 5 pin female connectors on my PSU. ...
    (microsoft.public.windowsxp.hardware)
  • Re: Treo USB no longer creating ttyUSB[01] devices???
    ... At some point in the past when we'd plug in a Treo 700p USB cable to ... Have you also checked that you have loaded the visor module with ...
    (Fedora)
  • Re: Can my mobo support an internal card reader? Pics included.
    ... >I have this usb card reader, which is usb plugged into a Syba pci card that ... > I have a front panel audio USB panel connected to my USB mobo headers. ... >> The black wire always goes on the 4th/5th pin like this. ...
    (alt.comp.periphs.mainboard.asus)