Re: SATA drive hangs on P4P800 Deluxe board.

What Paul says is essential, however, from my experience
SATA is know to have problems with its connectors.
Even the slightest sudden move of PC could cause
the partial disconnection of hard disk drive.
Be aware of it, before you start checking everything else.


"Diman" <diman1@xxxxxxxx> wrote in message
news:1133595754.270105.306430@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Thanks for your repl.ies :-)
> I will try everything. I hope it helps.
>
> Thanks again!!
>


.

Relevant Pages

  • Re: Its ROM 1.02; more symptoms; can anyone comment?
    ... less than 1 inch of ribbon cable exposed between the connectors, ... Prev by Date: ...
    (comp.sys.apple2)
  • Re: PATA HDD and only 2 IDE connectors
    ... It has 2 IDE connectors and 4 SATA connectors. ... the drives, I wouldn't even thing of going there. ...
    (comp.sys.ibm.pc.hardware.chips)
  • Re: !!!!!Computer wont boot up with SATA dvd burner connected
    ... not, I believe it to be 240 watt, the motherboard is a MS-7249 with 4 SATA connectors and I have tried all 4 connections and still will not go any further than the boot up window. ... another power supply handy to swap out and before I am to buy a new one I would like to know if this could be reason it will not work with the SATA dvd burner connected. ... SATA II drives are plugged into the motherboard. ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Asus-A8N-E issue or other? was Re: My 3rd sata drive
    ... If I plug any drive into the different sata connectors in turn ... It wrote out disk ID's instead of device names. ... Example from my machine with most SATA hard drives ...
    (alt.os.linux)
  • Re: Sata cabling
    ... Serial data transfer right. ... Take 4 SATA cables in parallel to a Hard Drive ... that has four SATA connectors. ...
    (microsoft.public.windowsxp.hardware)