Re: P4P800 deluxe Problem boot
- From: "paul" <nobody@xxxxxxxxxxx>
- Date: Tue, 29 Nov 2005 03:11:15 GMT
I had a similar problem recently.
Same overclocking voice heard
I discovered the power supply was not putting out enough current to power
mobo
Although voltages were OK current on the rails was too low.
This was a difficult problem to realize.
I suggest you try to boot the system using a different power supply with the
highest current ratings you can find.
My bet is your board will work again just like before...
"anao" <anao@xxxxxxxxxxxxxxxxxx> wrote in message
news:Xns971CDE305A6E2anaouserseasynewscom@xxxxxxxxxxxxxxxx
> HI,
>
>
> MOTHERBOARD: P4P800 deluxe P4P81104
> CPU: P4 2.40 GHZ
> MEMORY: 4*256 DDR 400
> BIOS: was 1019 but now 1021 08.00.09 (P4P81106)
> CPU TEMP: 33.5 C / 92 F to 39.5 c / 103 F
> MOTHERBOARD TEMP: 29 C / 84 F to 30 C / 86 F
> VCORE: 1.568 to 1.552
> 3.3 V: 3.296
> 5 V : 5.080
> 12 V : 11.856 to 11.9160
> CPU FAN: 2766 RPM to 2789 RPM
> VIDEO CARD: Matrox 550 AGP
> DRIVES: 3 - 2 ATA 1 SATA
> CD: ONE
> PS: 400
>
> This motherboard was working for 2.5 years with no to much problem.
> Suddently it stop working and reboot but when it try to reboot I can
> heard un message "fail because overclocking" I never overclock this
> motherboard.
> I try several time to reboot but if the power supply, hard drive, led on
> the board, nothing else was working, no image no message. I take the
> batterie of and clear the bios. I try to reboot several time nothing at
> all except for the PS, Hard Drive and led on the board.
> Several day pass and I try to reboot with no luck, I let the computer on
> for 15 minutes and reboot suddently the computer ask me for BIOS.
> I put the disk with bios ver 1021 and the computer flash the bios,
> I restart the computer, get POS, go on setup look on the setting but
> don't see any overclocking, the speed of CPU was At 2400 MHZ.
> Put the setup to default and reboot. first time I reached the window but
> stop here.
> I reboot several time finaly I got the computer to work for 10 minutes
> and it try to reboot by itself but this time instead of the POS image I
> have the message "BAD BIOS CHECKSUM"
> And the computer try to read my floppy and the CD to find the bios.
> I put the bios and it flash the bios another time.
> I reboot and everything was working for a while but after a while the
> computer try again to reboot but instead same message ""BAD BIOS
> CHECKSUM" and do another flash and reboot fine let me work for fews
> minutes and crash and so one.
> Now if I wait 15 to 30 minutes and I reboot nothing happen at first or I
> heard the message about overclocking, I wait 10 minute and I reboot the
> post ccome up and the window too but sometime I have the blue screen
> with tis message" Stop: c000021a {Fatal System Error}
> The windows Logon Process System Process terminated unexpectedly with a
> stats 0f 0xc0000005 (0x00000000 0x00000000).
> the sytem has been shut down."
> In breef I cannot working on this computer more as 30 minutes.
> Any Idea?
>
> Thank you.
.
- Follow-Ups:
- Re: P4P800 deluxe Problem boot
- From: NewMan
- Re: P4P800 deluxe Problem boot
- References:
- P4P800 deluxe Problem boot
- From: anao
- P4P800 deluxe Problem boot
- Prev by Date: P4P800 deluxe Problem boot
- Next by Date: A8N Premium is SATA II?
- Previous by thread: P4P800 deluxe Problem boot
- Next by thread: Re: P4P800 deluxe Problem boot
- Index(es):
Relevant Pages
|
