P4P800 deluxe Problem boot

HI,


MOTHERBOARD: P4P800 deluxe P4P81104
CPU: P4 2.40 GHZ
MEMORY: 4*256 DDR 400
BIOS: was 1019 but now 1021 08.00.09 (P4P81106)
CPU TEMP: 33.5 C / 92 F to 39.5 c / 103 F
MOTHERBOARD TEMP: 29 C / 84 F to 30 C / 86 F
VCORE: 1.568 to 1.552
3.3 V: 3.296
5 V : 5.080
12 V : 11.856 to 11.9160
CPU FAN: 2766 RPM to 2789 RPM
VIDEO CARD: Matrox 550 AGP
DRIVES: 3 - 2 ATA 1 SATA
CD: ONE
PS: 400

This motherboard was working for 2.5 years with no to much problem.
Suddently it stop working and reboot but when it try to reboot I can
heard un message "fail because overclocking" I never overclock this
motherboard.
I try several time to reboot but if the power supply, hard drive, led on
the board, nothing else was working, no image no message. I take the
batterie of and clear the bios. I try to reboot several time nothing at
all except for the PS, Hard Drive and led on the board.
Several day pass and I try to reboot with no luck, I let the computer on
for 15 minutes and reboot suddently the computer ask me for BIOS.
I put the disk with bios ver 1021 and the computer flash the bios,
I restart the computer, get POS, go on setup look on the setting but
don't see any overclocking, the speed of CPU was At 2400 MHZ.
Put the setup to default and reboot. first time I reached the window but
stop here.
I reboot several time finaly I got the computer to work for 10 minutes
and it try to reboot by itself but this time instead of the POS image I
have the message "BAD BIOS CHECKSUM"
And the computer try to read my floppy and the CD to find the bios.
I put the bios and it flash the bios another time.
I reboot and everything was working for a while but after a while the
computer try again to reboot but instead same message ""BAD BIOS
CHECKSUM" and do another flash and reboot fine let me work for fews
minutes and crash and so one.
Now if I wait 15 to 30 minutes and I reboot nothing happen at first or I
heard the message about overclocking, I wait 10 minute and I reboot the
post ccome up and the window too but sometime I have the blue screen
with tis message" Stop: c000021a {Fatal System Error}
The windows Logon Process System Process terminated unexpectedly with a
stats 0f 0xc0000005 (0x00000000 0x00000000).
the sytem has been shut down."
In breef I cannot working on this computer more as 30 minutes.
Any Idea?

Thank you.
.

Relevant Pages

  • Re: Something is wrong with my computer!
    ... (Use the motherboard monitoring software for your ... About a week later, today, game crashed again during WoW. ... it told me it wasn't booting from the right drive, so I went into the BIOS ... exactly what I mentioned above but this time it didn't reboot properly, ...
    (microsoft.public.windowsxp.general)
  • Re: cpu is unworkable
    ... manually changing the speed did the trick. ... time, change the CPU ... Now hit F10, answer Y to Save, and reboot. ... BIOS is corrupted ...
    (microsoft.public.windowsxp.newusers)
  • Re: What if Linus Torvalds= never released his toy kernel?
    ... That IS multitasking. ... Force the CPU into a triple fault, ... The BIOS resetted the CPU via the keyboard processor ... No reboot required, since the BIOS knew the difference ...
    (comp.os.linux.misc)
  • Re: computer fails to start on warm reboot
    ... >When I reboot the computer the computer does ... * Is the monitor simply staying in standby/off mode? ... Sometimes the CPU can happily boot from ... A motherboard swap-out is always a huge pain so that's a last ...
    (uk.comp.homebuilt)
  • Re: WMI and Joining Domain (sysprep related)
    ... > Just keep in mind that you have to rename the computer and reboot before you ... > use a script to automaticaly generate a sysprep.inf file that includes ... Dim sps_barcode,Flag,ExtraMsg ... '' Get workstation BIOS info for oeminfo '' ...
    (microsoft.public.scripting.vbscript)
Loading