P4P800-E Deluxe...which IDE connectors can I use
- From: "EFK" <noaddressgiven@xxxxxxxxxxxx>
- Date: Sat, 26 Nov 2005 20:05:44 -0500
I've got a P4P800-E Deluxe board coming this week and was skimming the
manual before it arrives. I'll be using a raid array for two IDE disks.
The board shows two IDE connectors (primary and secondary) and another
Primary connector for the Raid disks.
I'll install two HDDs on the Primary Raid connector as a master and slave
drive. Question is, for more IDE drives (DVD, etc.) can I use the other
Primary IDE connector (the NON-Raid one), or does the Primary Raid
connector map to that one? In which case, I could only use the Secondary
connector.
Simply put, can I use both Primary IDE connectors at the same time? One
for Raid, one not?
Thanks
Eric
.
- Follow-Ups:
- Re: P4P800-E Deluxe...which IDE connectors can I use
- From: Bill Smith
- Re: P4P800-E Deluxe...which IDE connectors can I use
- Prev by Date: Re: I deleted a raid 1 array, now cannot access the data on either disk.
- Next by Date: Re: Are maxtor drive known to fail???
- Previous by thread: P5RD1-V PROBLEMS
- Next by thread: Re: P4P800-E Deluxe...which IDE connectors can I use
- Index(es):
Relevant Pages
|
