Re: A7N8XE-Dlx sound not happening!

In article <thebarretthouse.1ytuja@xxxxxxxxxxxxxxxxxxxxxxx>,
thebarretthouse <thebarretthouse.1ytuja@xxxxxxxxxxxxxxxxxxxxxxx> wrote:

> Hi All - I have recently bought an A7N8XE-Dlx mobo off eBay, along with
> a XP3200+. The mobo and cpu seem to be working fine - using DDR400
> memory without any probs - and all appears stable (played HL2, Calll of
> Duty etc. without any errors). I'm using a MSI GF4 Ti4200 video card,
> and my mainboard is BIOS flashed to 1013, nForce drivers to 5.10, and
> ForceWare to 81.94.
>
> The problem is - there's no sound coming out of the socket at the back.
> I'm only using a bog standard set of headphones straight into the p.c
> (worked fine with my previous MSI mobo). There doesn't appear to be any
> conflicts or uninstalled devices in device manager - and I've played
> around with all of the settings in the nForce tray setup. It doesn't
> detect any hardware problems with the audio processors - and when I do
> the basic windows microphone setup it can detect my voice in - but will
> not relay it back out again. My question is - does anyone know of
> anything else I can try to see if I can get some sound out of this mobo
> before I sack it and buy an extra sound card??
>
> -- thebarretthouse

Try putting the two jumpers back on the FP_AUDIO header.
Check the user manual - you can download it from support.asus.com
if the manual is missing - and section 2.7 has an item that
explains where the two jumpers go on FP_AUDIO.

The two jumpers provide continuity for Line_Out left and right
channel. They allow Line_Out to be muted, if you connect an
"Intel Compatible" front panel audio setup, and insert headphones
into the front audio jack. With no front audio wiring, the jumpers
have to go back in place.

HTH,
Paul
.

Relevant Pages

  • Re: A7N8XE-Dlx sound not happening!
    ... Paul Wrote: ... > (worked fine with my previous MSI mobo). ... > detect any hardware problems with the audio processors - and when I ... > Try putting the two jumpers back on the FP_AUDIO header. ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Chaintech CT-7NJL6 not booting properly
    ... You should be able to back probe the MOBO connector. ... On jumpers, I'd remove, visually check and reinstall. ... install disk. ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: No one seems to want to answer this question?
    ... Kyle Holgate wrote: ... > Well if you have the audio ports on the back of the MoBo for sound ... > board peripherals tab and verify that the audio function is turned on. ... > least basic drivers for the sound. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Speaker stopped working
    ... RCA style jacks in order to clean out the contacts. ... That the MoBo in the 'Compaq Presario SR1303WM' is an 'Asus ... Now see the bottom-centre of diagram where it says "FRONT AUDIO' ... what would be on a pair of Headphones ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Speaker stopped working
    ... RCA style jacks in order to clean out the contacts. ... That the MoBo in the 'Compaq Presario SR1303WM' is an 'Asus ... Now see the bottom-centre of diagram where it says "FRONT AUDIO' ... I plugged in the speakers to the front green plug, ...
    (alt.comp.hardware.pc-homebuilt)