Also posted to alt.comp.hardware




"Darren J" <no@xxxxxxxxxxxx> wrote in message
news:434cdf0a$1@xxxxxxxxxxxxxxxxxxxxxxxxx
> I've been naughty and also posted to 'alt.comp.periphs.videocards.ati'
> under the subject
> '***Radeon 8500 deluxe*** 2 video cards and 2 monitors tried. Monitor has
a
> thin red line on boot up'
>
> --------------------------------------------------------------------------
--
> ----------------------------------
> Hi
>
> Until recently, the only symptom has been a thin-red vertical line,
showing
> in the middle of the crt monitor, when shutting Win2k down.
>
> I have an ***Radeon 8500 deluxe*** video card, with a way-too-heavy Zalman
> heatsink and fan (ZD80???). An Asus A7v333 mobo with AMD2200 cpu.
>
> Occasionally I have had to reseat or push the video card back into its
slot,
> as gravity and the heatsink are pulling the video card out of its AGP
slot.
> I've even made stilts for the card to keep it in place, which has helped.
>
> *********Here's the current problem*********
> I took the video card out to reseat it today. After I re-inserted the
card,
> I don't get a POST beep anymore but I do get a colorful little vertical
line
> on the monitor, for an instant, when booting up. (Typically this has been
> resolved in the past by reseating the video card or pushing it back into
its
> AGP slot.)
>
> I've tried using another monitor and video card in the AGP slot. Same
> symptoms.
>
> I don't have a spare PCI video card and I can't test my video card on
> another system, (in case air-brushing it also caused another problem), as
> the heatsink is too large to fit into my other PC's.
>
> I tried reseating the RAM, as perhaps forcing the video card into the
> motherboard time after time has caused some warping of the motherboard,
> although the mobo is supported, where the AGP slot is.
>
> I haven't reseated the CPU. I haven't removed all the cards and
reinserted
> them one at a time.
>
> I am extremely disappointed with the large video heatsink, as it has
> continued to pull my video card out of the AGP slot far too many times,
> though the cooling has been impressive.
>
> Should I try extracting all the cards and RAM and re-insert, one component
> at a time?
>
> If I reseat the CPU, then is my 6 month old tube of ARCTIC silver 5 up to
> the job? (Not always stored vertically.)
>
> I'll also have to find out how to remove my Thermaltake Volcano 7 heatsink
> and fan and re-install that, on the Web.
>
> Thanks for reading my rantings.
>
> Darren
>
>


.



Relevant Pages

  • A7v333. No video upon reseat. Just a thin red line at bootup
    ... Occasionally I have had to reseat or push the video card back into its slot, ... as gravity and the heatsink are pulling the video card out of its AGP slot. ... I took the video card out to reseat it today. ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Trying to install Video Card
    ... to install an after-market video card into an HP Pavilion ... cream-colored PCI slots. ... If a brown AGP slot exists, ... purchase and install a PCI ...
    (microsoft.public.windowsxp.hardware)
  • Re: eMachine T2625
    ... replaced it and it powered up but I get nothing on the monitor. ... Put in a new video card and got the same thing. ... integrated (1 AGP slot available for upgrade) ... Amplified Stereo Speakers ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: M/B Bios Settings
    ... by inserting a video card into an AGP slot instead of a PCI ...
    (freebsd-questions)
  • Re: Monitor and NIC card conflict
    ... Providing you are using an AGP slot based video, do not use the white PCI ... the furthest white PCI slot "shares" PC resources ... > everytime that I access Windows Explorer. ... I have changed my video card from on ...
    (microsoft.public.windowsxp.hardware)