Re: Which CPU can i use?



henrik1234567890@xxxxxxxxx schrieb:

> I have a P4B266 board.
>
> A have a spare P4 3.0 GHz HT CPU. Can i use this on my board?

If it's a Northwood, it may work at reduced frequency (IIRC the P4B266
only supports FSB400 officially, FSB533 is not unlikely to work too). Be
sure to flash the latest (beta) BIOS before attempting this... seems to
be 1011 beta 4 from Dec 2003.

Stephan
--
Home: http://stephan.win31.de/
PC#6: i440BX, 2xP3-500E, 704 MiB, 250+80 GB, R9k AGP 64 MiB, 110W
.



Relevant Pages

  • Which CPU can i use?
    ... A have a spare P4 3.0 GHz HT CPU. ... Prev by Date: ...
    (alt.comp.periphs.mainboard.asus)
  • Re: OT: CPUs
    ... Pentium Dual-Core Mobile Processor T2370 (1.73 GHz) $0.00 ... And spring the most amount of money for a CPU ... ) Even the lowliest iMac or MacBook meets or exceeds your specs (the lowest MacBook is 2.1 GHz, the lowest iMac is 2.4 GHz, the lowest MacBook Pro is also 2.4 GHz. ...
    (talk.origins)
  • Re: P4m: Speedstep defekt, CPU/Board kaputt?
    ... Mit der Funktion "Detext max. Speed" von Speedswitch (was die CPU auf volle Leistung antreibt und den Wert ausliest) kommt ebenfalls nur mehr auf 1,2 GHz. ... Beendet man I8kFanGUI bleibt auch die ...
    (de.comp.sys.notebooks)
  • Re: SP3 Success - 2 down 22 to go
    ... But while the 1st two upgrades were problem-free, the 3rd machine made up for that. ... Details of the 3.2 GHz software/hardware where I've done most of my testing so far are below. ... I've been humbled too many times by upgrades, so I'm not here to gloat, just report that SP3 does work well for at least SOME of us. ... My next machine has an AMD 3500 CPU, so I've renamed the INTELPPM.SYS file in preparation to upgrade it. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Intel Pentium Dual Core E5200 and Enhanced Speedstep
    ... > I have a small problem/question about my Pentium Dual Core E5200. ... > that the CPU frequency may not be running at the highest speed. ... > and increases at 2.66 GHz when the CPU is under load. ... You maybe should quote the earlier dmesgs re ACPI ...
    (freebsd-questions)