Re: Has anyone gotten an enermax PS to show PWR_FAN rpm's

timmy wrote:
>
> voltage! If there are 2 pins, it's more likely for rpm monitor only,
> but it should be labeled in any case...
>
> What exatly is the problem? It sounds to me like your not reading the
> rpm data for psu...In this case, you would need to disconnect the
> chassis fan header(front) or the case fan heade(rear)r. You cannot
> read 3, only 2 headers at once, plus cpu...
> Regards,
>
> On Sun, 07 Aug 2005 18:18:35 GMT, Gordon Scott
> <gordsmail@xxxxxxxxxxxxx> wrote:
>
> >timmy wrote:
> >>
> >> rpm monitor requires 2 leads only...the vre pin is not available
> >> because the psu powers it's own fan(s)...
> >>
> >> On Sat, 06 Aug 2005 18:20:04 GMT, Gordon Scott
> >> <gordsmail@xxxxxxxxxxxxx> wrote:
> >>
> >> >I'm going nutz trying to figger out why they dont use 3 pin fan control?
> >
> >So what exactly are you saying? whats a vre?

really, only 2 at a time, I wonder why?
So maybe I'll use the chassis fan header for the power supply fan, and
plug the chassis fan into the pwr_fan hdr.

Gordon
.