Re: P4C800-E Delux, winxp set up cant find ide drive
- From: "-;\)" <-;)@msn.net>
- Date: Wed, 27 Jul 2005 21:09:25 +0100
Igorek, on other topic... what vide card you're using with thin mo/bo?
Can you access freely BIOS? I have a problem with this mo/bo
using ATi Radeon 9550 Shappire card....
"Igoryek" <victoriov@xxxxxxxxxxx> wrote in message
news:arOdncsKW5IAaH7fRVn-uw@xxxxxxxxxxxxxx
>i followed all the steps, win xp does not see the drive
> "Crashpilot" <m.baur@xxxxxxx> wrote in message
> news:dboi0q$dns$1@xxxxxxxxxxxxxxx
>>
>>
>> First make sure your IDE drive is connected to the IDE
>> controller (connector beside the memory sockets)and not to the
>> promise RAID socket.
>> What I always do for a clean XP setup, I remove or disable any
>> disk controller that is not needed for the boot device (RAID
>> etc).
>> Load set up default in the BIOS.
>> Make sure your drive shows up in the BIOS screen.
>> Go to Boot menue-boot device priority and check if your drive
>> shows up as second boot device, 1st should be floppy.
>> Reboot, and your Win XP shoudl find the drive.
>> If you want to install to RAID you have to physically remove any
>> non RAID disks or Win XP will set the non RAID disk as active
>> boot drive.
>>
>> Good luck,
>> Crashpilot
>>
>> ----------------------------------------------
>> Posted with NewsLeecher v2.3 Final
>> * Binary Usenet Leeching Made Easy
>> * http://www.newsleecher.com/?usenet
>> ----------------------------------------------
>>
>>
>
>
.
- References:
- Re: P4C800-E Delux, winxp set up cant find ide drive
- From: Tim
- Re: P4C800-E Delux, winxp set up cant find ide drive
- From: Crashpilot
- Re: P4C800-E Delux, winxp set up cant find ide drive
- From: Igoryek
- Re: P4C800-E Delux, winxp set up cant find ide drive
- Prev by Date: Support CD for P4C800
- Next by Date: Re: A78X2.0 will not boot any drive
- Previous by thread: Re: P4C800-E Delux, winxp set up cant find ide drive
- Next by thread: A7N8X-X & Barton 2500 won't run at 400fsb
- Index(es):
Relevant Pages
|
|
