Re: SK8V - Cannot boot from SATA drive - HEEEELP!!!
- From: "Kliker" <jodo@xxxxxxxxxxxxxxxxx>
- Date: Wed, 27 Jul 2005 15:41:20 +0800
Are you using Intel RAID? If so make sure the you have " Serial ATA Bootrom"
enabled in the Bios
"G Couture" <gcouture66@xxxxxxxxxxxx> wrote in message
news:nygFe.2831$q23.409243@xxxxxxxxxxxxxxxxxxxxxxxx
>I just bought a nice WD Raptor SATA drive for my board. The BIOS detects
>it, Windows detects it (when I boot from my older IDE drive), but I just
>can't figure how to boot from the SATA drive. I have fiddled with the
>board's BIOS settings endlessly, but there seems to be no way I can set the
>main boot device to be the SATA drive. Anyone has an idea? How the f...k
>can I install Windows on a SATA drive if I can't set the drive as the boot
>device?!?
>
> G Couture
>
.
- References:
- SK8V - Cannot boot from SATA drive - HEEEELP!!!
- From: G Couture
- SK8V - Cannot boot from SATA drive - HEEEELP!!!
- Prev by Date: Re: A8V Marvel adapter doesn't work with a lot of routers
- Next by Date: Re: Question about my BIOS
- Previous by thread: Re: SK8V - Cannot boot from SATA drive - HEEEELP!!!
- Next by thread: HD required on primary mobo IDE channel?
- Index(es):
Relevant Pages
|