Re: Question about my BIOS
- From: "Bob Knowlden" <nkbob@xxxxxxxxxxx>
- Date: Tue, 26 Jul 2005 21:58:21 -0400
If you have the version of the P4PE that has a Promise SATA controller
onboard, and you have no SATA drive connected to it, you'll get the "no BIOS
installed" message at startup. This refers to the Promise controller's BIOS,
which is in addition to the mainboard's BIOS.
It's similar to what you'd get with the SCSI controller another poster
mentioned.
Address scrambled. Replace nkbob with bobkn.
"Diaboyos" <diaboyos@xxxxxxxx> wrote in message
news:woBFe.12996$X76.7198@xxxxxxxxxxxxxxxxxxxxxxx
> I'm using a P4PE board. Every time upon boot I get the message that the
> BIOS is not installed. But it is. I can access the BIOS and adjust
> things
> as needed. The computer runs fine, I'm just curious why this would
> happen.
>
>
.
- References:
- Question about my BIOS
- From: Diaboyos
- Question about my BIOS
- Prev by Date: Re: Question about my BIOS
- Next by Date: A8V Marvel adapter doesn't work with a lot of routers
- Previous by thread: Re: Question about my BIOS
- Next by thread: Re: Question about my BIOS
- Index(es):
Relevant Pages
|
