Re: can I use cl3 memory instead of 2.5 ?

Hello Paul again,

Very many, many thanks for the fantastically detailed reply you have
given - I'm working my way through all the info contained therein -
the Memtest+ program is particularly useful and I've had a go at
testing that with my existing setup, which understandably shows no
errors. I'll see what I can do with the new memory asap.

Thanks again,
T
.

Relevant Pages

  • Re: Booting questions ....
    ... > memory is already setup to be one flat address space. ... > #ifdef MEMTEST ... The loader has a protected mode environment. ...
    (freebsd-arch)
  • Booting questions ....
    ... Display any holes after the first chunk of extended memory. ... #ifdef MEMTEST ... What modules are already setup by the time we enter the code above??? ... But then printf would probably be destroyed as ...
    (freebsd-arch)
  • Re: System_service_exception error on vista
    ... Unless there is a limit to the memtest capability, you do have memory ... and i hit yes to display crash log and it doesn't pop anything up. ... I used the registry mechanic to look through my event logs. ...
    (microsoft.public.windows.vista.performance_maintenance)
  • Re: ASUS P5N32 SLI E and RAM errors
    ... RAM with another set of RAM. ... Also checked- my RAM is on the QVL ... Just to be sure, did you install just one stick, run Memtest on it, then ... - does this mean the memory is OK and I should be looking at the ...
    (alt.comp.periphs.mainboard.asus)
  • Re: BSOD Stop 0x00000019
    ... Do the errors occur in safe mode as well as normal mode? ... A pool header issue is a problem with Windows memory allocation. ... are available to make a boot floppy or a boot CD. ... you remove the Memtest floppy or CD from the drive. ...
    (microsoft.public.windowsxp.hardware)