Re: CPU upgrade from AMD X2 3800+ to 7750BE



For example, say I have DDR2 memory. Industry standard voltage
is 1.8V. The memory package says "2.2V". Set Vdimm to 2.2V
and test. Is the memory error free ? Now, reduce Vdimm
to 2.0V. Is the memory still error free ? If not, increase
to 2.1V and try again.

When four sticks are next to one another, sometimes
the cooling situation is not very good. I had that
problem with some DDR memory. By reducing Vdimm, the
power dissipation will drop a bit, so the memory
can run cooler.

I think M2N-E was not designed to handle the load of a X2 7750 plus 8G
DDR2-800 RAM....

After a bit of trying, I settled with 2x1G pink heatsink + 2x2G black
heatsink DDR2-800. All made by A-Data.... I think my curiosity ends
here, until I have spare money for a newer motherboard (like Asus M3N78
PRO).

--
@~@ Might, Courage, Vision, SINCERITY.
/ v \ Simplicity is Beauty! May the Force and Farce be with you!
/( _ )\ (Xubuntu 8.04.2) Linux 2.6.28.4
^ ^ 19:33:01 up 1 day 28 min 0 users load average: 1.00 1.00 1.00
不借貸! 不詐騙! 不援交! 不打交! 不打劫! 不自殺! 請考慮綜援 (CSSA):
http://www.swd.gov.hk/tc/index/site_pubsvc/page_socsecu/sub_addressesa
.



Relevant Pages

  • Re: CPU upgrade from AMD X2 3800+ to 7750BE
    ... Memory must be set up properly, via BIOS settings. ... until memtest86+ is error free. ... Increase Vdimm, to a value recommended for the memory. ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Qualified Vendor List, memory for M2N-E
    ... or 2 2GB modules of same specs. ... I did a quick scan on the vip forums, and one person tried 4x2GB and did eventually ... as I haven't read what happens with memtest86+ and 8GB of memory on AMD.) ... I saw one other comment about available voltages for Vdimm on M2N-E. ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Memory underclocked problem
    ... But regardless of upping the voltage to 2.1 or leaving it at 1.8 the clock doesn't change, ... If the memory setting ... If it is error free, in a long run, drop the ... For Prime95, select "stress testing" when it starts. ...
    (microsoft.public.windowsxp.hardware)
  • Battlefield 1942 will not run - The memory could not be "Written"
    ... All drivers are up to date and I have run tests on the ... memory and everything checks out OK. ... Dxdiag is error free and everything is ...
    (microsoft.public.windowsxp.games)
  • Re: HP Memory Question
    ... Sounds good to me :-) It is CAS3, which is industry standard CAS latency. ... Enthusiast RAM is CAS2.5 or CAS2, but you don't need that in a RAM ... give you a good idea whether your new memory is free of the worst kind of faults. ... Stop it after four hours or so, as your check for error free performance. ...
    (alt.comp.hardware.pc-homebuilt)