Re: Printer and USB Port - This device can work faster...



You can disable that error message. Just go to device manager and select
the USB Universal Host Controller, right click and select properties, go
to
the advanced tab and uncheck tell me if this device can performan faster.

If the message is appearing, then the device is only working at USB 1
speeds. Not an issue for a printer - but a big issue if you connect a hard
drive to the same port!
The main thing to check is that you do have a USB2 enhanced host controller
in device manager. The best way is to go to device manager, change the view
to 'Devices by connection', and then expand the PC tree until you see all
the USB contollers listed. If you expand each of these, it tells you what is
connected to each controller - and by moving devices around you can
experiment which ports are USB2.
The only time I had a similar issue to yours, it turned out the motherboard
CD did not have the correct drivers for USB 2 enhanced - I found some
updated drivers direct from the chipset maker (SIS), and all my ports
starting working in USB2.


.

Relevant Pages

  • Re: ActiveSync Connection Error
    ... >The sync function is inconsistent...sometimes it ... I've got this error message ... >when I pull up the device manager tab and view USB ...
    (microsoft.public.pocketpc.activesync)
  • Re: USB Power Surge on Enhanced Host Controller Issue
    ... Without the Wireless USB NIC installed. ... Click on the Enhanced Host controller. ... Have you added any new USB peripherals to your PC recently? ... > moment I enable the Enhanced USB Host Controller in Device Manager, ...
    (microsoft.public.windowsxp.general)
  • USB host controller and client driver
    ... attach a USB device - pen drive to the usb port. ... during the boot time the USB host controller driver DLL - ... It is taken care by device manager. ... What is the role of function drivers ?? ...
    (microsoft.public.windowsce.platbuilder)
  • RE: USB 2.0 Unknown Devices
    ... USB PCI card. ... > Device Manager shows "SiS PCI to USB Enhanced Host Controller" ... If I disable the Enhanced Host Controller, the unknown devices get ...
    (microsoft.public.windowsxp.general)
  • Re: Problem with net connection after using USB device
    ... Each USB Host Controller has a limited amount of Bandwidth, ... want to check the loading in Device Manager on the Advanced ... Also watch out for power loading as ...
    (microsoft.public.windowsxp.general)
Loading