Re: DVD Burning Problem
- From: "Matt Newman" <m.newman@xxxxxxxxxxxxxxxx>
- Date: Sat, 06 Oct 2007 13:12:21 GMT
"Peter" <pete.ivesAll_stRESS@xxxxxxxxxxxxxxxx> wrote in message
In article <%LrNi.306$ah6.143@xxxxxxxxxxxxxxxxxxxx>,
Other than burning converted dvd movies have you been successful with
"Larry" <lpt@xxxxxxxxxxxx> wrote in message news:fe5evi$qtr$1@xxxxxxxxxxx
Matt Newman wrote:
I am having a problem with burning DVDs (converted AVI files to DVD
format) - using various software like ConvertXtoDVD, DVDShrink, Nero
Approximately 30% through the burn process the burn fails with one of
following errors -
"Write error at 3056(16) - Code 06 29 00 (Unit attention, Power On or
Device reset occured)"
"Write error at 878016 (16) - COD3 052102 (Illegal request, invalid
for write)"always used
I am using a new batch of DVD+Rs, (Manufacturer ID CMC MAG E01) but
same brand as I have used many times before successfully (I have
DVD+Rs with no real problems!). Now I have had a few problems with myformat,
over the past few weeks so went for a complete Windows install post
and reinstalled all the software. The PC is sweet as a nut, but theproblem
above still occured. I tried a RiDisc DVD+RW and it worked fine withmedia
ConvertXToDVD. The problem occurs with any avi file I convert!
I used the DVD+R in my laptop to burn the same files as I thought bad
and it worked fine. According to Nero InfoTool my DVD Writer supportshttp://www.ukdvdr.co.uk/shop/Yellow-Top-8x-DVD-R-CMC-Dye-100-pack-pr-18258.html
types of writeable DVD except DVDRAM.
The DVD files on the HDD post conversion play fine too.
So whats the problem - I do think its the discs but maybe I need to
The link is the DVDs I am having trouble with
Generic media using CMC Magnetics dye. Nothing wrong with CMC +R dye,
but the polycarbonate substrate or even the recording layer may be
Did you try burning at 6x speed ?
Buy a small quantity of either of these product:
Burn at 8 or 12x maximum.
You might also upgrade the firmware as support for newer media should
being updated frequently.
Thanks guys for the advice on firmware - I upgraded from 3.6 to 3.7 and
burnt the movie - with the following error -
" write error at 758176 (16) Code 052102 (Illegal request, invalid
Burning was at 6X
My dvd writer is Philips DVDR1640P
Any more thoughts please?
burning ordinary files to disc. Try burning a large folder to disc, for
instance using nero.
Also, what file sizes are these movies? I suspect quite large. Have you
tried converting smaller avi's - say less than 50mb - and seeing if they
Remove All_stRESS before sending me an email
Thanks all for the advice - I seem to have solved the problem - by upgrading
the firmware and burning at the lowest possible speed!
For info the AVIs I am converting and burning are either 700MB or 1.4 GB -
the last two with ConvertXToDVD have been successful so many thanks again!
- Re: DVD Burning Problem
- From: KingTutt@xxxxxxxxx
- Re: DVD Burning Problem
- Prev by Date: Memory toast and Mobo
- Next by Date: Re: Bad SATA drive
- Previous by thread: Re: DVD Burning Problem
- Next by thread: Re: DVD Burning Problem