Re: Memory Issue

Hi Bruce,

Yes it is. I have the KVR800D2N5K2/2G the K2 indicates it is a kit of 2. So that should be the same as the KVR800D2N5 / 512 on the list. Just the 2G version. The 512 version is listed as working fine with 4 slots. I had not thought about the fact that the 4 1G sticks might have issue with the 4 slots.


"Bruce Xia" <bruce@xxxxxxxxxxx> wrote in message news:fdhk2b$a0f$1@xxxxxxxxxxx
Bluenose 637 wrote:
> Hi all,
>
> I've got my new rig up and going. Asus P5K Deluxe,4 gb Kingston RAM,
> Nvidia GTS 8800, WD SATA 2 HDD, SATA 2 RW DVD, SATA 2 DVD, Intel core 2
> duo E6850. Win xp sp2 / Vista 32 dual boot
>
> Got things up and running fine. But I started getting random CTDs in
> some programs and the error message referred to memory issue (could not
> copy, etc). I installed my old 3.5" drive and ran MEMTEST 86. Let it
> run all night and sure enough I had some errors. I could not tell which
> stick though so opened up the case and installed the sticks one at a
> time (total of 4) and ran MEMTEST 86. No errors. So then I took one
> stick and move it to each DIMM slot and ran the MEMTEST 86. No errors.
> 8 runs total no run less than 6 hours (I seem to recall more than 15
> passes).
>
> The only thing I can think of is that there is a heat issue when I have
> all 4 sticks in and the cover on. The memory is "bare" does not have
> the heat shields I have had on other memory. I have checked my MB temps
> and it never seems to get above 125F when I am looking and is usually
> around 110F. My CPU temp is usually about 100 - 105F under load, sub 100
> when idle. My CPU fan hangs around 410RPM. two other fans in the case
> - one 120mm on back and one 120 mm on top. Power supply is in seperate
> compartment with own fan. Fans are only 3 prong so I can't see RPMs,
> but they are always running. Using the fan control on the MB.
>
> Do it look like heat or could it be something else I can check.


Is the memory listed on the Asus QVL ?

http://www.asus.com/999/download/products/1646/1646_10.pdf

Try two known good modules next, for several days. Leave the case closed.



.

Relevant Pages

  • Re: Fresh install wont compile requirement libraries for cvsup (the verdict is in)
    ... The problem was heat. ... I turned on the system to see what the fan was doing. ... before swapping out memory I tried it. ...
    (freebsd-questions)
  • Re: Memory Issue
    ... If I let memtest 86+ run for 8 to 10 hours i will generate and error or two. ... But I started getting random CTDs in some programs and the error message referred to memory issue ... Power supply is in seperate compartment with own fan. ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Memory Issue
    ... But I started getting random CTDs in some programs and the error message referred to memory issue ... The only thing I can think of is that there is a heat issue when I have all 4 sticks in and the cover on. ... Power supply is in seperate compartment with own fan. ... memory bus may require backing off the timing a bit. ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Memory Issue
    ... But I started getting random CTDs in some programs and the error message referred to memory issue ... I could not tell which stick though so opened up the case and installed the sticks one at a time and ran MEMTEST 86. ... The only thing I can think of is that there is a heat issue when I have all 4 sticks in and the cover on. ... Power supply is in seperate compartment with own fan. ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Memory Issue
    ... The memory is "bare" does not have ... > the heat shields I have had on other memory. ... My CPU fan hangs around 410RPM. ... Is the memory listed on the Asus QVL? ...
    (alt.comp.hardware.pc-homebuilt)