Re: SATA conflict

On Aug 24, 8:49 pm, "JAD" <john d...@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
wrote:
"Terry" <kilow...@xxxxxxxxxxx> wrote in message

news:1188002842.635771.22450@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>I have a KT7A RAID mobo. It comes with the old IDE RAID connectors
and I am not using these. I also have 3 IDE hard drives installed and
working fine.

I just installed a PCI SATA RAID controller card that comes with two
SATA ports. I hooked a SATA drive to the primary controller.

Now when I boot I get a message that says the card is installed and
reports the drive, but then hangs. Secondary channel: Drive not
found. It says hit F4 for RAID options, but hitting F4 does nothing

reset your boot sequence

I have looked through the bios. I have an option to boot from other
disabled. The bios is set to boot from hd0 which is the way it was.

Booting with the new hard drive plugged into the card hangs the
machine.

When I plug in the drive and check the bios it is not listed. I
assume this would be "boot from other"



.

Relevant Pages

  • hang on the boot up grogress bar
    ... hangs during the boot up at about 1/3 progress bar is showing (with the ... And the BIOS was older than the one on the old board. ... middle of the boot when Windows logo is showing and the progress bar will go ... So what kind of recovery option do I have? ...
    (microsoft.public.windowsxp.general)
  • Re: SATA 750 and jumpters
    ... It hangs the computer at boot. ... If som a BIOS update of the ... The cards on the bottom of the drives are not the same. ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: 2.6.24-rc8 hangs at mfgpt-timer
    ... Arnd Hannemann wrote: ... I'm trying to boot 2.6.24-rc8 on a GEODE LX board, ... What BIOS are you using? ... the bios the machine hangs directly after: ...
    (Linux-Kernel)
  • RE: CDROM Boot Hangs But Only Under 6.x
    ... CDROM Boot Hangs But Only Under 6.x ... check your bios settings (and mayhap ... No amount of poking around in the BIOS settings seems to help either. ...
    (freebsd-questions)
  • Re: [9fans] plan9 wont install on my system
    ... and then it just sort of hangs there and nothing else goes on. ... you wouldn't happen to have sata ports and pata ... the ahci interface running on the same drives. ... pata/sata ports in bios. ...
    (comp.os.plan9)
Loading