Re: Broken IDE interface?
The hard drives are formatted NTFS.
I have tried booting each drive individually, set as master, to no
avail.
When I first tried, the settings hadn't changed from the last time it
had worked on the cmos. I looked around inside the bios for settings,
and couldn't find anything that was really wrong or out of place.
Maybe it is the power supply...
.
Relevant Pages
- Re: UDMA & mode 4
... Master will be on the end, ... PCs that have trouble with hard drives bigger than that. ... > connector ideally is meant for the master mode & which one ... > In some HDDs there are 5 jumper settings while in some ...
(microsoft.public.windowsxp.hardware) - Re: UDMA & mode 4
... Master will be on the end, ... PCs that have trouble with hard drives bigger than that. ... > connector ideally is meant for the master mode & which one ... > In some HDDs there are 5 jumper settings while in some ...
(microsoft.public.windowsxp.newusers) - Re: Media Player 11 skips during folder access/scrolling
... Serial ATA Controllers - however, interestingly both the hard drives are on ... I've looked in the settings and it's only set ... My current install of windows is only 3 months ...
(microsoft.public.windowsmedia.player) - Re: Media Player 11 skips during folder access/scrolling
... I've looked in the settings and it's only set ... My current install of windows is only 3 months ... I have two hard drives installed on my PC, ... momentarily eating up processes or causing some problem with the memory. ...
(microsoft.public.windowsmedia.player) - Re: installation problems
... I dont have an "optimal settings", ... As far as install disc for the ... hard drives not always being found (url at end of ... did you try setting your Bios to Optimal ...
(microsoft.public.windowsxp.hardware) |
|
