Re: DIY external drive rack

64BDzer wrote:
so what i'm thinkin is an old box with power supply -
so that will power the drives

but i need to get from ide cable jack to usb out to the main PC

is their a simple ide to usb option or can i even butcher a pc ?

or can anyone recomend a DIY sight?


Here is an example of an adapter kit for one drive. You wouldn't need to
use the power adapter included with the kit, because you're getting
power from your ATX PSU. I expect you can find the adapter separately,
if you search long enough.

http://www.newegg.com/Product/Product.aspx?Item=N82E16812107114

I'd experiment with one drive and one adapter first, and see if
everything works OK.

You could also just use the power adapters, and plug them all into a
power strip. Then you wouldn't need to play with the ATX supply at
all.

If you had four disk drives, you'll have four USB connectors.
You either need a hub, or a computer with four USB jacks on
the back, for that to work.

I presume you know how to turn on the ATX PSU. You need to
connect PS_ON# to an adjacent COM pin. Then, when you switch
on via the back, the power will come on immediately. If you
want finer control, you can also use a separate switch, to
connect PS_ON# to COM. The switch needs to make sustained contact,
to keep the supply running.

You could use COM and one other terminal on the following switch,
to connect PS_ON# to COM on the ATX PSU. That is less stressful,
than having to switch via the switch on the back of the
enclosure all the time. You can mount this switch somewhere on
the front of the box, and run two wires to the PS_ON# and COM.
(If you use the NO and NC terminals on the switch, that won't work.
One of the terminals used, must be the COM or common terminal.)

http://www.radioshack.com/product/index.jsp?productId=2062507

Paul
.

Relevant Pages

  • Re: Cannot mount 2.5" drive in USB 2.0 case!!
    ... >>>backup the whole disk. ... Hence the usb IDE interface case. ... see if applying power via ... I have no luck at all running laptop drives from unpowered USB ...
    (microsoft.public.windowsxp.hardware)
  • Re: Time Machine & Laptops.
    ... I use a Seagate USB 2.5" drive all the time and it works great. ... these drives come with USB cables that split off into a Y and take up ... two USB ports on the computer so the drive gets enough power. ...
    (comp.sys.mac.system)
  • Re: Target Disk Mode not working?
    ... portable hard drives, paranoia is the only sane option. ... power, which is odd - I'd have expected autosensing, like mine do. ... 'good' for video editing then hooking up a FW camcorder or high speed ... than USB under most conditions. ...
    (uk.comp.sys.mac)
  • Re: HELP: External 250G USB screwed with GParted
    ... USB 2.0 cable, but would with the supplied WD cable. ... All the USB 2.5 inch adapters that I'm ... and check the power capacity of the port prior ... SATA drives (not all; in their wisdom, ...
    (Fedora)
  • Re: ad0 READ_DMA TIMEOUT errors on install of 7.0-RELEASE
    ... It does not matter how new/old the disk is, ... I always figured it was due to the rotational speed increase in commodity drives. ... I'm assuming that it is total power on time since the drive was manufactured. ... Help me or I switch to DragonFly BSD/Desktop BSD/Linux which is perfect and has no problems!" ...
    (freebsd-stable)
Loading