Re: Boot problems

In alt.comp.hardware.pc-homebuilt Dave <dlmoak@xxxxxxxxx> wrote:

I have a homebuilt PC that's worked flawlessly for a year, and now it
won't boot up reliably. It's an MSI MS-7103 motherboard with a Celeron
D 2.66. I have one hard drive, a CD R/W drive, a wireless card and an
AGP DVI card.

It usually gets through POST and enters the Windows XP splash screen,
then it turns itself off. The odd thing is that if I can get it to
boot, it will run reliably all day long with no problem.

Here's what I've done so far:

*Replaced the CPU fan thinking it was a cooling issue. The new fan
works better, but I still have the problem.

*Reinstalled Windows.

*Completely disassembled the PC and put it back together again,
verifying all the connections.

Any ideas on what might be causing this, or what else I can try to
solve it?

Thanks!

Power-supply or memory problems come to mind; with the first being much
more likely. Bad caps on the motherboard come in third.

Don't forget cables to the hard-drives as well.
Had more troubles with poor cables ....

--
_____
/ ' / ™
,-/-, __ __. ____ /_
(_/ / (_(_/|_/ / <_/ <_
.

Relevant Pages

  • Re: Boot problems
    ... It's an MSI MS-7103 motherboard with a Celeron ... I have one hard drive, a CD R/W drive, a wireless card and an ... boot, it will run reliably all day long with no problem. ... when a system begins having startup problems. ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: OSR504 boot STOPS after "Loading kernel ... .text"
    ... > and boots just fine with the new motherboard. ... > When booting with fdunix, ... > SDRAM Timing Control AUTO ... it reads floppy and CD-ROM filesystems using BIOS floppy disk ...
    (comp.unix.sco.misc)
  • Re: Making a L440GX+ work (was "Trying to revive a server... AIC-7896 freezes pre-POST compl
    ... You should be able to update the BIOS from a floppy or cd-rom boot disk. ... The general rule with ram is you can run faster ram than you need, just usually wastes money that faster RAM costs. ... That jumper should reset the BIOS to factory defaults to allow it to get through the post and into setup. ... I know this isn't a FreeBSD question really, but I just started up a motherboard with onboard SCSI, and for some odd reason it freezes pre-POST before it attempts to boot and there isn't any way where I can get into the BIOS to change the settings it seems. ...
    (freebsd-questions)
  • Re: Pzavillion dv2555nr--dead video--need help
    ... Since I can't get the machine to boot, ... Does the laptop boot and display something when an external monitor is ... If so, then there hope for some sort of replacement, maybe the ... which means the motherboard is pretty useless. ...
    (comp.sys.hp.hardware)
  • Re: problems with Win XP SP3 Booting
    ... First, With an ASUS motherboard set to "cable select", is there ... The BIOS boot order will change itself, ... (Typically, removing the currently selected disk, will do it.) ... The BIOS is not clever enough to analyse the drives and see what ...
    (microsoft.public.windowsxp.general)