Re: Booting Machine
- From: "John Leddy" <leddyjp@xxxxxxxxxxxx>
- Date: Fri, 20 Apr 2007 17:19:29 -0400
I installed the old power supply and all works perfectly. The new power
supply was defective!
John
"John Leddy" <leddyjp@xxxxxxxxxxxx> wrote in message
news:f07r1j$ju8$1@xxxxxxxxxxxxxxxxx
I always started my system by:
1. Turning on the switched surge protector which started the monitor
2. Pressing the start button on the front of the computer
The machine would then boot.
I replaced the old power supply with a new one that has a rocker on off
switch and I am now having trouble. To start the same way as before, I
now have to turn the power supply rocker switch on and off a few times to
get the machine to boot. Once started, all is fine. I also now have to
do the same thing to get the machine to wake up when in the sleep mode.
It has been recommended that I replace the power supply, but everything
works fine after the system boots.
Before I replace the power supply, I would like to know if there is a
procedure to start a system with a power supply that has a rocker on and
off switch.
.
- Follow-Ups:
- Re: Booting Machine
- From: w_tom
- Re: Booting Machine
- References:
- Booting Machine
- From: John Leddy
- Booting Machine
- Prev by Date: Re: External enclosure recommendations
- Next by Date: Re: Booting Machine
- Previous by thread: Re: Booting Machine
- Next by thread: Re: Booting Machine
- Index(es):
Relevant Pages
|
