Re: Motherboard Manual - KOB 693 DCS

Paul wrote:
Shubhrajyoti wrote:
From where can I find the manual for KOB 693 DCS motherboard. I need
to plug the USB cable but could not locate where to plug it as "USB"
is no where printed on the motherboard. My device manager shows the
following under Universal Serial Bus controllers:
# USB Root Hub
# VIA Rev 5 or later USB Universal Host Controller

View the below mentioned link to see the photo...
http://www.flickr.com/photos/shubhrajyoti/446319311/



OK, after a bit more searching, try this link:

http://www.mercury-pc.com/download/uploaded/drivers/KOB_693_DCS(1.5).pdf

And the answer is not what you would expect. Kobian has a proprietary
connector (J7), where you would plug in a USB adapter. They do not
include the pinout in the manual! So the PCI USB2 card looks to be
the most practical solution. Unless you are skilled at tracing
copper tracks and guessing at the wiring.

Paul
.

Relevant Pages

  • Re: My USB SP2 fix
    ... I have 6 USB devices that were connected to this PC before the SP2 update ... Class: Universal Serial Bus controllers ... Device Drivers: ...
    (microsoft.public.windowsupdate)
  • Re: USB Hard Drive loses its USB connection constantly
    ... Each device is on it's own USB port. ... Class: Universal Serial Bus controllers ... No resources used. ...
    (microsoft.public.windowsxp.general)
  • Finding an updated XP driver for USB 1.1 port
    ... Im at the current maintenance level for IBM and Microsoft. ... The Universal Serial Bus Controllers and Standard Universal PCI to USB ...
    (microsoft.public.windowsxp.hardware)
  • Motherboard Manual - KOB 693 DCS
    ... My device manager shows the ... following under Universal Serial Bus controllers: ... # USB Root Hub ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Huge CPU usage using USB hubs
    ... Maybe the % of USB Bandwidth is too high. ... Open Device Manager ... Expand the Universal Serial Bus Controllers category. ...
    (microsoft.public.windowsxp.general)