Re: Converting desktop LCD monitor to 12v???

Charlie Wilkes wrote:
I live off the power grid and am itching to build a 12 volt mini-itx desktop system that is energy efficient.

The catch is that 12v LCD monitors, designed for automotive applications, are VERY expensive ($300 for a 15" unit).

Don't the standard desktop LCD monitors convert AC grid power to 12v DC anyway? How hard would it be to hack one of these units to run directly from a 12v power source?

All advice and comments welcome. Thanks.

Charlie

My LCD monitor has a separate wall wart, and it converts 115VAC to
12VDC at 4 amps max. The monitor uses 3 amps max, and probably
a bit less than that. So my LCD would be a good candidate
for your project. There are also LCDs that integrate the
power into the base of the monitor, and those would not be
a good candidate for your project. So you're looking for a
monitor that uses a wall wart, as the most likely solution.

You can see in this picture, for example, that an external
power supply is used. This is just the first one I found in
the Newegg collection.

http://images10.newegg.com/NeweggImage/productimage/24-005-035-07.jpg
http://www.newegg.com/Product/Product.aspx?Item=N82E16824005035

The tough part, will be converting from your unregulated battery
voltage (13.2V perhaps) to the 12V the monitor is expecting.

Here is an example of a module to convert from your battery,
to drive the LCD. Some connector surgery will be
required, plus the addition of a switch, to disconnect the
battery when you are not using the monitor.

DC-DC Regulator Module : 10-17VDC to 12VDC 4 Amp $14.95 (not in stock)
http://www.batteryspace.com/index.asp?PageAction=VIEWPROD&ProdID=2494

Note that the above regulator module, is probably not an "isolating"
type. The wall wart that comes with the LCD is isolating, meaning the
AC power rails and the DC outputs are not connected in any way. When
you use the above 10-17VDC to 12VDC converter, that is probably
a buck converter, with a common ground. That means the ground of
your battery system, also is the ground of the monitor, the monitor
VGA shell will also be at the battery ground potential. This is fine
if the computer is also grounded the same way. There are also regulator
modules that will fully isolate the output (the same way that an
ATX power supply does), but they will likely be a few dollars more.

Paul
.

Relevant Pages

  • Extreme Motion Blur with Samsung 2232 bw (22")
    ... I've recently bought an LCD monitor, ... reviews about it and made my choice about the samsung monitor. ... is, I get ALOT of motion blur, in windows (XP & and tried on Vista ... Another idea was that I might have a bad power supply. ...
    (comp.sys.ibm.pc.hardware.video)
  • Re: Which type of Monitor
    ... >> monitor? ... >> explore LCD. ... > I really want to replace CRT with LCD, and I have looked at many> different ... > portrait and zoom in 100-300% to work on skin-texture etc. and the DOT> on ...
    (alt.photography)
  • Re: OGL (was Re: Random total lockups)
    ... > CRT monitor jiggled due to an unusually strong magnetic field, ... > never gone more than 11 days without a lockup before. ... > in the new apartment before the LCD came, so I know it wasn't the power ... You were on a dodgy power connection. ...
    (Fedora)
  • Re: Video card problems?
    ... Tim, try this for me. ... Remove the battery for a couple of minutes and put it back in. ... you may just want to try a different monitor to see if it works. ... Monitor getting power from the PC's power ...
    (microsoft.public.windowsxp.hardware)
  • Re: Question about screen.
    ... year old) LCD monitor, I don't know why but when it goes to the powersave ... the power cord ... ... to tell the OS to always keep my monitor on. ... and had no idea how to fix it. ...
    (Fedora)