Epox Beep Codes

hi,

ive installed an Epox 4BDA with a 400mhz p4 and 2x256mb ddr ram. i
have an agp graphics card in it.

when i turn the machine on the fans power up etc, but i get a
completely blank screen and a stange beep code.

it starts off with a very long beep, but before the second long beep
finishes, a higher pitched and faster set of beeps begin to soun out
over the top of the continuous long beeps.

is this a number of problems to cause a more complex beep code?

thanks for your help,

duncan

.

Relevant Pages

  • Re: :: WEIRDDD ... any help plz
    ... the bios, but it beeps, look up the beep code and see what it means. ... If it doesn't get to the bios and doesn't beep, ... Make sure the standoffs for the motherboard are in the ... in and see if any give you an error or it refuses to boot. ...
    (microsoft.public.windowsxp.hardware)
  • Re: No SATA support in Recovery Console and no floppy. BSOD loop a
    ... These are nearly always hardware compatibility issues ... Beep - Currently the only beep code indicates that a video error has occurred and the BIOS cannot initialize the video screen to display any additional information. ... Disable automatic restart on system failure. ...
    (microsoft.public.windowsxp.general)
  • Re: Beep Code Question Please
    ... >> beep code on boot or reboot. ... If google could solve the issue I wouldn't have bothered you. ... Dudley Henriques ...
    (microsoft.public.windowsxp.hardware)
  • Re: Asus vs USB question please
    ... I have the beep codes, ... My BIOS is an AMI/ASUS. ... > The link above has beep code information. ... >> this USB port use confirmation for the printer and 3 controllers I ...
    (microsoft.public.windowsxp.hardware)
  • Re: Computer cutting out?!
    ... happen if the PSU load was too much? ... if it doesn't startup and beep then it's something bad. ... Once you get the beep code you at least know something ... mainboard or CPU. ...
    (uk.games.video.misc)