Re: New PC won't POST - new CPU, worked but now no POST
- From: Chris Hill <chill_mapsfree_000@xxxxxxxxxxxxxx>
- Date: Tue, 29 Aug 2006 14:33:33 -0500
On 29 Aug 2006 05:14:51 -0700, jshaw01@xxxxxxxxx wrote:
ECS Nforce-3a Motherboard
AMD Sempron 3400+
The thing wouldn't POST, I tried everything you oculd think of. The
bare system, out of the case etc. I sent the CPU back and they said it
was faulty, so sent a new one back.
I installed the new one and the PC POST'ed no problem. I set the BIOS
settings etc, then I Exited with saving. The PC then just went to a
blank screen and the drives kept clunking as if they were looking for
something. So I thought I would install XP. Turned the PC off, but when
I restarted it, it wouldn't POST. No beep. Nothing.
Everything is whirring away - all the fans etc.
If I take out the RAM it beeps at me.
Any ideas at all??
Junk psu or bad mainboard. Check your connections and make sure all
the mb power connectors are being used.>
.
- References:
- New PC won't POST - new CPU, worked but now no POST
- From: jshaw01
- New PC won't POST - new CPU, worked but now no POST
- Prev by Date: Re: Question on CPU usage %
- Next by Date: Re: Upgrade Intel 440LX motherboard- from 233 Mhz Pentium2
- Previous by thread: New PC won't POST - new CPU, worked but now no POST
- Next by thread: Re: New PC won't POST - new CPU, worked but now no POST
- Index(es):
Relevant Pages
|
