Re: PC not booting up

whirlwindkevin@xxxxxxxxx writes:

My PC is not booting up and Power LED of my PC is not glowing when i
switch on my PC.
also No signal is coming to monitor ..I have tried everything I
know.Replugged RAm modules ,etc..
Please any geeks out there tell me what the problem is this?

A failed power supply is the first thing that comes to mind.

You've turned on the master switch at the back of the machine, on the
power supply, right?

Have there been any recent thunderstorms or power failures where you
live? Have you ever added hardware to the machine beyond what it
originally came with?

--
Transpose mxsmanic and gmail to reach me by e-mail.
.

Relevant Pages

  • Re: Electronic multi-switches
    ... An electronic switch of some sort works as ... when an Atari mono monitor is present ... whenever an Atari monitor is used it will work just ...
    (sci.electronics.basics)
  • Re: LCD Monitor Problem - Turns on and off
    ... I had registered my monitor and asked the representative when I called ... he came to switch the monitor on, ... 82k startup resistors were pretty distressed and high. ... there was a single 220uF cap on the primary side. ...
    (sci.electronics.repair)
  • Re: Starting
    ... My system is a HP with a CRT monitor. ... Every morning when I first switch my system on everything starts up and I ... again and my system won't work until I restart it the second time. ... The monitor has its own power cord and goes into standby, ...
    (microsoft.public.windowsxp.basics)
  • Re: Vaxstation 3100 and graphics card
    ... > pin vax monitor plug to the 15 pin d-sub VGA plug. ... > happen even if the adaptor is not connected. ... and the manual does not indicate any switch or jumper ... the two switches on the graphics card). ...
    (comp.os.vms)
  • Re: resolution changes and KVM switch use
    ... I've set up a KVM switch between a PC running XP and one with Vista ... positioning) when separately connected to the monitor. ... Is this likely to be a KVM switch issue, a conflict between the XP and Vista ... If the user enters the control panel for the video card, the driver may ...
    (microsoft.public.windowsxp.hardware)