Re: I'm at the proverbial brick wall with this 'puter!



On Fri, 16 Jun 2006 05:25:47 -0500, David Maynard <nospam@xxxxxxxxxxx>
wrote:

The Seabat wrote:
OK, I've got a four or five year old Gateway, 400MHz, 64MB RAM,
Windows 98SE. I can't seem to figure out what is keeping this puppy
from connecting to the internet.

I've changed DSL modems three times.
Swapped around cat5 cables a whole lot of times.
Tried three different NIC cards, one twice after it was sent back from
the factory (D-Link) with a report that it was fine.
Windows recognizes the D-Link card (DFE-538TX) and the drivers install
just fine. There are no problems in Device Manager or in Networks in
the Control Panel.
There are no settings for the NIC card in the BIOS, I checked for
sure. No conflicts with IRQ's. The NIC card is the only PCI card.
Video and sound are both onboard the motherboard.
When the cat5 is installed into the slot in the card, the green light
comes on and so does the light on the modem. But it will not connect
to the internet, or even let me connect to the modem. Everything works
fine except you can't connect to the net.

All the parts have been installed in an other system and they all work
just peachy that way. I have wiped the hard drive clean, reformatted
and re-installed Windows 98SE twice. I have un-installed and
re-installed Windows network three times. I've been into save mode and
made sure that all devices had been deleted before installing them
again and that is all clean, except for what is supposed to be there.
I have moved the NIC card around all the PCI slots on the motherboard
to no avail.
Everything works! But it won't access the web. Arrrrrgghhhhh!! I'm at
a loss. Nothing seems to be broken or not working, so how the H***
does one fix it?? Could this be a sneaky plot by Gateway to keep
everything but their proprietary junk off this 'puter?? I know, I
know, but I'm grasping at straws right now!

The seabat.....sitting in the corner giving before mentioned computer
the evil eye!

You went through all the hardware descriptions but not a word about the
network configuration and I'd bet that's where the problem lies.

The most basic question is, when you speak of "Microsoft Network" did you
install TCP/IP?
Yes, it has been installed several times.

After that, what are your TCP/IP settings?
IP Addres = Obtain auto
WINS config = Use DHCP
Gateway = blank
Bindings = Cliehnt for Microsoft Network checked
Advanced = Allow binding to ATM - checked yes
Netbios = greyed out
DNS config = Disabled

Btw, while you're at it, remove NetBEUI and IPX, if it's there.
They have already been removed

--
The Seabat
.



Relevant Pages

  • Re: Adding network and internet to Warp 4
    ... install it "found" my NIC card, and loaded the generic Realtek OS/2 ... You should note that there are more than one driver for RealTek NIC. ... Loading Realtek Fast Ethernet Network Adapter driver ...
    (comp.os.os2.misc)
  • Re: SP2 what a bunch of @#$!!!
    ... I installed SP 2 but lost network connectivity as a result, ... so i forced a hardware reboot. ... My last resort was a repair re-install of windows SP-1 from the original CD. ... end of the install after it had written a lot of stuff to the disk. ...
    (microsoft.public.vstudio.development)
  • Re: Windows cannot find C: (doc) Make sure you typed the name cor
    ... default printer back to my brother network printer. ... Windows cannot print due to a problem with the current printer setup ... uninstall the printer driver, and then install the latest version of ... from Outlook email - it opens a blank page in Word 2007 and you ...
    (microsoft.public.word.application.errors)
  • Re: Is your system Hacked/Owned
    ... > There are a number of ways to tell if your Windows system is hacked. ... > Select Start, Control Panel, Network, and if you see two ... > have found the hackers love to install a bunch of their crap here. ...
    (comp.security.firewalls)
  • Re: Have Win98SE OEM on laptop, want WinXP Home upgrade now - Does OEM
    ... for file sharing with existing network - network currently consists of one ... Whatever I did caused Windows to complain that Windows ... Second fresh install Saturday. ... | XP Home when it costs 99 dollars when you can get the OEM XP Home for 89 ...
    (microsoft.public.windowsxp.general)