Re: USB Switch


<madhava.Gadicherla@xxxxxxxxx> wrote in message
news:1150218846.403449.182100@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hi ,
I have an project where in i need to share a USB mass Storage Device
among two HOST PC's. The hosts would not use the Shared resource at the
same time. So I planned to use 4 SPDT Swithes to switch the Storage
device when ever required. When I did implemented this, I found that
the Mass Storage device was not recognized by either of the PC's. Could
anyone explain the reason and method to implement such a solution
Regards
Have you checked your wiring with a meter? What happens if only one
computer is running?
Mike.


.

Relevant Pages

  • Re: USB Mass Storage Device : Too many bus resets from Host to USB
    ... I have exposed SD card as the Mass Storage device. ... But the drive is coming up after 5 resets (i.e. 5 repeated enumeration). ... The MSD host driver will probe the ...
    (microsoft.public.windowsce.platbuilder)
  • Re: USB Switch with SPDT
    ... I have an project where in i need to share a USB mass Storage Device ... among two HOST PC's. ... _4_ SPDT switches? ...
    (sci.electronics.basics)
  • Re: USB Memory Stick
    ... > USB Mass Storage Device ...
    (microsoft.public.windowsxp.embedded)
  • USB Mass Storage Device : Too many bus resets from Host to USB device.
    ... I want to expose the SD Card as a USB Mass Storage Device. ... When I checked the interrupts status register, then I was shock to see ... that I was getting too many bus resets interrupts from the host. ... I recieve bus- reset ...
    (microsoft.public.windowsce.platbuilder)
  • Re: USB Switch with SPDT
    ... I have an project where in i need to share a USB mass Storage Device ... among two HOST PC's. ... So I planned to use 4 SPDT Swithes to switch the Storage ...
    (sci.electronics.basics)