Re: I have a LOT of problems (NOT RESOLVED)


"Everlast746" <no@xxxxxxxxxxxx> wrote in message
news:qW_Xf.11421$cX5.1591@xxxxxxxxxxxxxxxxxxxxxxxxx
GRRR new RAM. I can't even get to the partitions screen when
installing windows, so i do not know if RAM is the problem. I get
back from disneyland and it has a new problem. it says CPU has been
changed, please go into bios to reenter settings. F1 to continue. I
see nothing wrong with the settings, and when putting in windows CD
and booting from it, it gets stuck on Loading file... (Windows
Executive)

soo i buy a new motherboard. (Asus P5PL2) new problem! WEEEE... I put
it in and everything and i start it up, it says "Overclocking
failed or overvoltage failed. F1 to continue" so i go into BIOS
to see what the problem is, and a few seconds later, BAM computer
turns off. Most of the time when i turn it on, fans start but nothing
happens and in like 10 seconds it turns off again. If I'm lucky I can
get into BIOS.


sound PSU related under load and its failing. Also make sure of the
settings identifying the CPU.


.

Relevant Pages

  • Re: Starting Windows 2000 hangs on new install.
    ... When I mentioned entering the bios I meant was the new cpu being correctly ... with the settings on auto and with the settings forcing ... > || Kevin. ...
    (microsoft.public.win2000.setup)
  • Re: Lost HD Master function / CMOS checksum error
    ... CPU has changed. ... Please re-enter CPU settings in the CMOS setup and remember to save ... posted was related to a BIOS problem. ... A 3D Linux Desktop... ...
    (microsoft.public.windowsxp.general)
  • Re: finding fail-safe default for XP laptop
    ... again and it cannot setup on partition 3, ... delete partition and it will create a partition for windows. ... I tried the reload default in bios settings; I am not sure if the computer ...
    (microsoft.public.windowsxp.setup_deployment)
  • Re: finding fail-safe default for XP laptop
    ... Description of the Windows XP Recovery Console for advanced users ... again and it cannot setup on partition 3, ... I tried the reload default in bios settings; I am not sure if the computer ...
    (microsoft.public.windowsxp.setup_deployment)
  • Re: Setup freezes with TX2000 raid controller
    ... Windows Server 2003 did work with the Maxtor ATA133 ... the bios when I first bought it. ... I have a new FX5200 256MB video card so I will have to ... The cpu is Intel P3 1.13ghz Tualatin. ...
    (microsoft.public.windows.server.setup)