Re: PCI IRQ Routing Table Error on POST causes loads of video problems.
- From: "JAD" <kapasitor@xxxxxxxxxxxxxxxx>
- Date: Tue, 28 Mar 2006 14:29:35 -0800
in the bios..change the switch
PnP OS installed? - NO/YES whichever is the opposite of the current setting.
reset configuration data -YES
If you have
'USE MS routing table' or
'enable ms ROUTING TABLE'? - ENABLED
"jonfaquit" <jonfaquit@xxxxxxxxx> wrote in message
news:1143528737.398845.210190@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Does anyone know what that means? I just bought a new motherboard &
amd64 athlon; The mobo does not have onboard video, but I have this PCI
ATI Rage Card. I have 5 PCI slots, & an AGP slot.
After POST, I get a 'PCI IRQ routing table error [0:05:00]". My mobo is
MSI K8T Neo-V (MS-7032) w/latest BIOS (which is AMI) off the MSI site
(version 5.0). My video card is the only device using an expansion
slots.
Problem 1: IRQ Routing table error [0:05:00]
Problem 2: Load defaults always gives the 8-beep error (from
http://www.ami.com/support/doc/AMIBIOS-codes.pdf: 8 beeps=display
memory error, also, "If the system video adapter is an add-in card,
replace or reseat the
video adapter. If the video adapter is an integrated part of the system
board, the board may be faulty.")
Problem 3a: On setup of Win2k, BSODs saying that the BIOS is not fully
ACPI compliant & tells me to install disabling HAL/ACPI (by pressing
F7)
Problem 3b: Disabling HAL/ACPI installs, but the end result is video @
640x480 x 16 colors, and unable to install drivers; Error in device
manager says the BIOS did not supply enough info to properly configure
the device
Problem 4: Windows XP installs perfectly, however, video is super
crappy. I'm not a gamer so take that into consideration cause "crappy"
to a gamer might be normal to me. So when I say something's crappy,
it's absolutely horrid. For example, scrolling a simple window like
notepad visually repaints the window like I was downloading a picture &
displaying as it comes using a dialup connection....this process also
runs the CPU up to 70-90% and takes about 2 seconds.
I've tried different memory, uninstalled all hardware except memory,
CPU, and video card & still have the same result.
ANY help or at least pointers?
.
- Follow-Ups:
- References:
- Prev by Date: Re: 30 amps on a 12 v rail
- Next by Date: Re: thermal compound
- Previous by thread: Re: PCI IRQ Routing Table Error on POST causes loads of video problems.
- Next by thread: Re: PCI IRQ Routing Table Error on POST causes loads of video problems.
- Index(es):
Relevant Pages
|
