Re: Opinions on ASUS A8N5X??

In article <j5v802doig9dmlfjd1l7bnl8uemi6puf21@xxxxxxx>, Theodore Baldwin
Boothe III <DNC_TN@xxxxxxxxx> wrote:

ASUS A8N5X Socket 939 NVIDIA nForce4 ATX AMD Motherboard
http://www.newegg.com/Product/Product.asp?Item=N82E16813131569

All I am wanting to do is get into to the 64bit arena but in a way
that give me a good speed increase over socketA[asus 87n8x standard].
I am also wishing to upgrade to 64bit in a way that does allow for the
upgrade to X2 in the future but nothing really to flashy.

Anyone have an opinion on this motherboard OR can offer a better board
considering this one is around $85?

thanks for helping me,

Look through the reviews on Newegg:

http://www.newegg.com/Product/CustRatingReview.asp?Item=N82E16813131569

or for unresolved issues, have a look at the Asus forum:

http://vip.asus.com/forum/bbs.aspx?SLanguage=en-us&model=A8N5X

On the Asus forum, set the "Since" menu to "All Days".

HTH,
Paul
.

Relevant Pages

  • Re: DeLL drops 6%
    ... I'll put a new video card in but I'm just used to getting a new ... computer when I want to upgrade. ... Any reason I find for wanting a new ...
    (comp.sys.mac.advocacy)
  • Re: apt-get help upgrading
    ... but i was wanting to use apt-get to upgrade it to the latest ... is there any command or way i can do this or a repo entry that i can add ... Brendon Toogood ... I used it to upgrade my FF to 1.5.0.2. ...
    (Ubuntu)
  • Re: Can learning on old, crappy unicycle to start be counterproductive?
    ... Unless it stops you from wanting to persevere, ... progress quite as fast as with a brand new Nimbus ISIS freestyle (or ... you will have to upgrade. ...
    (rec.sport.unicycling)
  • Re: Buying equipment in missouri
    ... Does anyone know any decent places in Missouri to buy pins and rings? ... wanting to upgrade ... from the horrible red-blue-yellow set that I currently have. ...
    (rec.juggling)
  • Re: Looking for used mill
    ... Fargo, ND area or within reasonable distance, 500 miles for the ... No junk, must be useable. ... I've been wanting to upgrade from R8 to taper 40 tooling. ...
    (rec.crafts.metalworking)