Re: Free brain teaser - Networking ?


David Maynard wrote:

The worst is the subnetting because both 1 and 2 must be on for 3 to get to
the internet.

thank you very much
i've made 4 passes at a config..im pretty patient..gave each try time
for the dust to settle...Im doing somethng wrong...

each time I think i am setup...i lose my network far as file sharing

--

whats the odds of seeing a flow chart...
i think visuals would help me alot right now...lol

im dying to know! I can't help but feel it's very simple..
i have just never seen the relationship in numbers..

in theory, I could put the right numbers in and all 3 machines could
run for 5 more years as is....I hate to jump out of the boat 5 feet
from the shore and drop 50 bucks on a router..

you say its doable...

I have 1st nic set to auto - the dsl router gives it an ip, subnet and
gateway
(it is ICS enabled)

will I be manually configuring all 5 cards?
what dem numbers look like?

can you type it out for me...lol

please...
--

see, the dsl router gives the 1st card a 255.255.255.0 subnet
you say give 2nd card at 2nd pc, a sep subnet...so I see 2 subnets on
the second machine one on the left one on the right...you say..I can't
have the same subnet where two nics are on the same pc, but the 1st pc
has 2 nics and the same subnet...

another question I had, is about dhcp server (if im saying that right)
domain host controller protocol...(it can assign an ip? right)...

all 3 computers are dhcp enabled right now...(or if I do a manual
configure across the board..then dhcp servers are just idle?) im
wondering if I can turn them off

Well...Thank you for any considerations here...im having fun..

.

Relevant Pages

  • Re: DHCP and subnets
    ... client sends a broadcast on the wire and a DHCP server replies. ... IP subnet you want it to use for a particular client? ... tell the difference is if the request is received from a particular segment ... NICs on this machine and in the future this server will need to ...
    (microsoft.public.windows.server.networking)
  • Re: Windows 2003 Server DHCP + 2 NIC
    ... What makes you think that the NICs are in the same IP subnet? ... I have a DHCP server with 2 NIC's and I want it to serve IP-addresses ... Will this give me any problems, seeming that the NIC's are on the same ...
    (microsoft.public.windows.server.networking)
  • Dual NICs
    ... One machine, 2 NICs. ... Each on it's own subnet with it's own DHCP server. ... PathPing and it always seems to use the same NIC. ...
    (microsoft.public.windowsxp.network_web)
  • Re: UpdatedConfirmation of NLB
    ... IP Subnet. ... It seems that you're intending the second NICs as the Heartbeat ... Configure Network Load Balancing (NLB) with Two Network Adapters ... Configure the NLB Cluster properties according to your parameters, ...
    (microsoft.public.windows.server.clustering)
  • Re: Problem using Remoting with 2 NICs
    ... I agree with you on the 2 NIC's with same subnet being a bad idea. ... Setting the http channels useIpAddress property to false on the server fixed ... I have clients connecting successfully on NIC 1, ... When both NICs are enabled. ...
    (microsoft.public.dotnet.framework.remoting)