The parallel port , serial port, onboard graphic all have "?" to hold the
cables screwed to them in place. Jack screws? and where to get them, besides
the used motherboard collecting dust.... they are of standards someplace,
they all swap with each other (modern boards anyway) VGA is unique set .the
rest are the same.
- Re: What is the best USB-to-RS232 adapter out there?
... parallel port. ... a USB-based serial port will work ... The ones that are not are USB. ... uses keyboard LEDs blinking in sequence to do the programming. ...
- Re: Recommendations for an Eprom Emulator
... >>> more direct link. ... >> My team has used PROMIce emulators for over 10 years. ... The parallel port driver required for use with NT/2000 is ... That is the problem the disappearing parallel and serial port. ...
- Re: Migrating from PIC18 to ARM: which MCU to choose?
... USB going to be around? ... it's very cheap and easy to put a parallel and/or serial port PCI card into a PC - they are fully supported by any decent OS and even by the BIOS. ... The market for embedded XP is tiny, and windows is not much used by embedded developers looking for long term availability of software or hardware. ... Parallel port is less likely - most current use of parallel ports on windows involve "cheating" in some way with drivers that give programs direct access to the hardware. ...
- Re: Machine wedges solid after one serial-port source-lineaddition...
... > structure that's only written at interrupt, ... precise timing information, to free up the serial port for something else. ... rejected as spam) that I had a problem accessing the parallel port nACK ...
- Re: [2.6.1] Kernel panic with ppa driver updates
... > parallel port after I've done that. ... > get the whole oops message for you? ... you stick a nullmodem in it and in serial port on another box, ... send the line "unsubscribe linux-kernel" in ...