Re: A Open MK77MII
should have auto detect of the add on card.
when you plug the monitor into the integrated port do you have video?
check the seating of the AGP card
"lindy" <ruthlindy@xxxxxxxxxxxxxxxx> wrote in message
news:4479vtFohc4U1@xxxxxxxxxxxxxxxxx
> Built a computer about a year ago and since it had onboard graphics
decided
> to install a new card, I disabled the onboard in the Bios and the computer
> refuses to show any graphics at all can't even get into the bios or DOS
> using a boot disk, the computer seems to be booting internally I can hear
> the beep and other noises as it boots. Any help for this old man?
>
>
.
Relevant Pages
- Re: Install PCI-E, blackscreen POST
... I am afraid to configure the bios setup to look for the video on ... the PCI-E card first because if I do that and the card is bad, ... How is this business about changing from integrated video to pci-e card ...
(alt.comp.hardware.pc-homebuilt) - Re: external eSata enclosure drive recognition?
... As it is now, the Dell BIOS only ... A separate card can be used two ways. ... Seems like the BIOS chip on that PCI card would have to load anyways, just to allow it and its controller to function, with any connected device. ...
(microsoft.public.windowsxp.hardware) - Re: external eSata enclosure drive recognition?
... put the eSata connector cable and mounting bracket in there, so that I can plug in my external eSata HD enclosure into the computer in the back, using the SATA cables. ... But your idea of a separate controller card sounds perhaps better, and safer, I guess, albeit more expensive. ... As it is now, the Dell BIOS only shows the option for IDE emulation of SATA, since that goes with the Intel MB and chipsets I have on this Dell 530, presumably. ... On an add-in card that supports RAID, the BIOS chip on the card can even ...
(microsoft.public.windowsxp.hardware) - Re: Onboard graphics woe
... The onboard graphics cant be disabled in the bios or by a jumper, ... onboard graphics card. ... Does the BIOS have a setting where you can change the primary and secondary card around? ... some boards like the one I described disables the onboard when an AGP card is installed. ...
(Fedora) - Re: What do you think, will connecting a ST-225 work (part 2)
... the card seems to be configurable for DMA3 and PIO. ... First thing to do is to low-level format the drive with the ... there are no system BIOS settings needed to ... does disabling both IDE in BIOS PERIPHERAL SETTINGS make ...
(uk.comp.homebuilt) |
|
