Re: Installing SATA Hard Drives Help

Once again thanks for your help
Merry Christmas
Regards
Bob
<jer4202@xxxxxxxxx> wrote in message
news:1134581359.909847.79570@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> It depends on the ports in which your hard drives are okugged into. If
> you look in your mobo manual, you will find a diagram that tells you
> which raid controller each port is controlled by. The sl3114 is for the
> silicon raid ports. I assume the NF3 raid is for nvidia raid, but im
> not sure on that one. Go ahead and try the Auto Create Raid Driver
> Floppy, cause it must automatically know which one you have. Hope this
> helps, wrtie back if not.
>


.

Relevant Pages

  • Re: Stable on Supermicro server?
    ... and a mail server. ... The SATA RAID controller, although it provides a 'legacy' option ... 2 ports with 2 removable, ...
    (freebsd-stable)
  • Re: searching for a specific sli motherboard (8 sata too and esata) any thoughts?
    ... pcie x1 = 2 ... SATA 8 ports (raid 5 a must) ... due to the size of the cooler on the video card. ...
    (alt.comp.hardware.pc-homebuilt)
  • RE: Possible Onbaord RAID Controller Failure
    ... the onboard controller and BIOS set to RAID, ... I would get to a point where the hard drives were not ... As a point of reference, if I run the Win XP setup disk, I get to the Setup ... This leads me to believe that either the RAID controller on the motherboard ...
    (microsoft.public.windowsxp.hardware)
  • Re: I REALLY wish I bought a P5B Deluxe instead of a P5W DH Deluxe
    ... Concerning running two RAID sets: run the first pair of disks on the ... plan on installing Windows onto either one of these RAID sets, ... I know that the orange Sil ports are connected to the Intel southbridge ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Raid cards for home server
    ... ports, it tends to be the former case and you can usually disable ... RAID ability, it tends to be the latter, in which case you'd choose ... bios (whether within the main bios or via the seperate pop up hot key ... This is the option you need so that FreeNAS gets its ...
    (uk.comp.homebuilt)